全部

1·Based on the optimization, experiments are conducted to obtain the uniformity ratio and the corresponding dimension ratio which suit the multiple hole drilling process.

基于该优化设计并结合试验得到了适合正流群孔电解加工的分流均匀度系数和相应的尺寸系数。

2·Compared with the effects of amplitudes of the speed ratio function on the(lapping) uniformity, the effect of phase is much less.

对研磨均匀性来说，转速比函数幅值影响较大，相位的影响是很小，可以忽略。

3·Multidirectional liquid circulating system decreases bath ratio and increases the uniformity of bath liquid.

多向的循环液流系统，降低了活比，增加了浴液的均匀度。

4·The pore radius was in nanometer scale, with uniformity and high ratio of depth and radius, so it's ideal mask for one-dimension nanometer materials.

其孔径为纳米级且分布均匀，纵横比大，是合成一维纳米材料的理想模板。

5·The effects of packing structure, azimuth factor, shape factor, orientating factor, axis ratio and size uniformity on the packing fraction have been also evaluated.

讨论了堆积结构、方位因子、形状因子、取向因子、轴比和粒度均匀性对堆积系数的影响。

6·Droplet distribution uniformity, drift and coverage ratio are main indices of appraising spray quality.

雾滴分布均匀性、飘移性和对目标的覆盖率是评价喷雾质量的主要指标。

7·Using ball mill mixture process. the fibers dispersion is uniformity and its aspect ratio can meet the demand.

采用干法球磨混合分散可以使纤维在耐火基质中分散较均匀。且纤维长径比满足要求。

8·The stronger cationic of starch, the higher ratio of S:MA help to improve the gray scale, color difference, contour sharpness and uniformity of ink film of end prints.

较强的淀粉阳离子性，较高的S：MA比例有利于最终印品阶调、色偏、轮廓清晰度和墨层匀度的提高。

9·The influence of growth parameters including gas flow, C/Si ratio, growth temperature and pressure on growth rate and layer uniformity in thickness and doping are discussed.

比较了外延生长参数，如生长温度、生长压强、碳硅比和气流流速，与生长率和净载流子浓度的影响关系。

10·Optical characteristics-related measurement projects in it include: shining luminance, angle-related luminance uniformity, angle-related contrast ratio, gray scale curve, etc.

其中与光学特性测量有关的项目有：发光亮度、角度相关亮度均匀性、角度相关对比度、灰阶色度线性等。