全部

1·The building is solidifying music and a bound note in nature.

建筑是凝固的音乐，是大自然中一个跳跃的音符。

2·Inside Georgia, there were signs of solidifying Russian control.

有迹象表明，俄罗斯在格鲁吉亚境内加强了控制。

3·The label number of diesel oil is classified by its solidifying point.

柴油的标号是按照它的凝点来划分的。

4·This kind of community feedback has been a big help in solidifying the software.

像这样的社区回馈给了项目极大的帮助。

5·We worked on solidifying Colors in English by playing games and doing an art project.

我们通过玩游戏和做彩色鱼巩固了上次和本周的颜色英语单词。

6·The solidifying defects after filling can be easily erased by the pressure during the forming.

在成形过程中压力容易消除粘结体充填后的凝固缺陷。

7·ISS soil solidifying agent is a new roadbuilding material and a new soil solidifying technology.

ISS土壤固化剂系新型筑路材料，新的土壤固化技术。

8·After solidifying agent on mixing the chemical solidifying and reaction with exothermic will occur.

树脂与固化剂调配方便，一经混合便产生放热式的化学固化反应。

9·Increasing the spinning temperature and take-up velocity, the solidifying region is becoming broad.

同时，提高纺丝温度，增加牵伸速率，将使固化区长度增加。

10·You write tests before you write the code, solidifying your understanding of what the code needs to do.

先写测试，再编写代码，这样可以巩固您对代码所需执行的操作的理解。

固化

1·They have found applications in almost all the process industries for everything from roasting chocolate beans to freezing vegetables, recovering acetone to solidifying radioactive waste.

在化学加工业几乎所有的方面都有流化床的应用，从烘烤咖啡豆到冷冻蔬菜，从回收丙酮到固化核废料。

2·Releasing steam heat from the mass concrete structures while solidifying leads to produce the temperature change and contraction.

大体积混凝土在固化过程释放的水化热会产生较大的温度变化和收缩作用。

3·After the coating solidifying, the pipe test should be done with defect detector under the specified voltage.

待涂层固化当前，要应用缺陷检测器在涂料技术标准中规定的电压下对钢管进行检测。

4·It is found that the temperature gradient of solidifying front edge could be reduced by reducing focused lamp intensity and increasing substrate temperature.

发现适当降低聚焦加热灯强度、提高衬底加热温度可以降低固化前沿温度梯度，从而降低亚晶界等缺陷密度。

5·Spunbonded nonwoven technology is a technology which combines the spinning technology of chemical fiber and the web forming and solidifying technology of the nonwoven.

纺粘非织造工艺是将化纤的纺丝和非织造布的成网、 固化技术相结合的工艺技术。

凝固

1·Then more powder is added, melting and solidifying to add layer upon layer until the object is fully formed.

然后加入更多的这种粉状材料，熔化后再凝固，层层堆积，直到最后形成要制造的物品。

2·Liquid hydrogen also has the potential of solidifying air which can block safety relief devices and other openings, which may lead to rupture of the container.

液氢有凝固空气的潜力，这会阻塞减压装置和其它的容器开口，可能导致容器破裂。

3·Temperature and flow fields, and interfaces of water freezing in soil and crude oil solidifying in the pipeline were obtained through numerical simulation.

通过数值模拟，获得了停输期间温度场、流场以及土壤水分结冰界面和管道中原油凝固界面的分布情况。

4·Volcano lava ice cavern, formed mainly because of the different solidifying velocities between surface lava and bottom lava.

火山熔岩冰洞，是由于表层熔岩和底层熔岩的凝固速度不一样而形成。

5·The solidifying defects after filling can be easily erased by the pressure during the forming.

在成形过程中压力容易消除粘结体充填后的凝固缺陷。

(1)solidifying point凝点；凝固点