全部

1·Two steps are involved to determine the regeneration valve opening in practical application.

实际应用时，分两步来确定再生调节阀开度。

2·Still another embodiment of a valve (220) includes a plug (232) that is attached to a valve opening.

阀门的另一个实施方案(220)包括连接到阀门开口的塞子(232)。

3·Stroke control mechanism for the regulation and precise control of valve opening and closing position.

行程控制机构，用以调节和准确控制阀门的启闭位置。

4·Manual mode, display the corresponding valve opening, the display range is not limited from 0.00 to100.0.

自动模式下，正常状态显示当前阀门开度，显示范围不受0.0。

5·Speed control Valves are available for controlling valve opening or closing speed with pneumatic actuators.

速度控制阀可以用来控制阀门气动执行器的开启或关闭速度。

6·The single unit cap and lifting lever permit manual valve opening (testing) with low required force on the lever.

这种一体式阀盖和提升杆使得检测人员只需轻轻扳起测试杆即可人工手动开启阀门进行测试。

7·The output of the controller is used as practical output to control valve opening, thus to reach the setting target.

将控制器的输出作为实际输出来控制调节阀的开度，以达到给定设定目标。

8·Analyze the relationship between flow, pressure, pressure differential and valve opening of pressure reducing valves.

分析了减压阀的流量、压力、压力差和阀门开度的关系。

9·Regeneration opportunity and regeneration valve opening of DPF are controlled by 80C196KB single chip microprocessor.

采用80C196KB控制柴油机微粒过滤器再生时机和再生调节阀开度。

10·In the steady state, the control room water, drainage same, the main valve opening constant outlet pressure stability.

在稳定状态下，控制室进水、排水相同，主阀开度不变，出口压力稳定。