全部

1·Die cast zinc alloy valve body.

锌合金压铸阀体。

2·Lightweight magnesium alloy valve body.

轻巧的镁合金阀体。

3·Remove the body bolts from the valve body.

从阀体上拆卸阀体螺栓。

4·An O-ring seals the relief valve body to the main housing.

用一个O形环密封安全阀阀体与主外壳。

5·Leave the CAM assembly clapper parallel to the valve body.

使得凸轮总成阀瓣平行于阀体。

6·Inlet and outlet ends are located at two ends of valve body.

进口端与出口端分别位于阀体的两端。

7·Thoroughly clean all inside surfaces of the relief valve body.

彻底清洗安全阀阀体的所有内部表面。

8·Valve body and internal parts: anodized aluminum alloy, copper.

阀体和内部零件：阳极电镀铝合金、铜。加固端盖：塑料。

9·Beneath the hand wheel are two nuts attached to the valve body.

在手轮下面是两个附在阀体上的螺母。

10·Vent the piping and test valve body cavity to remove air or steam.

排放管道和试验阀门体腔内的空气或蒸汽。

阀体

1·These valves contain two coils and one valve body and spool assembly.

这些阀门包含两个线圈、一个阀体和阀芯总成。

2·Lightweight magnesium alloy valve body.

轻巧的镁合金阀体。

3·Any kind of valve body can forging, also can cast, should according to the requirements of users and manufacturers owned manufacturing methods.

任何一种闸阀阀体即可锻造，也可铸造，应根据用户要求以及制造厂拥有的制造手段而定。

4·Valve body shall be drilled and tapped for a pressure connection on top and bottom of the housing.

阀体应该钻孔和攻丝用于在顶部和底部外壳的压力连接。

5·Beneath the handwheel is one set of wrench flats on a nut threaded into the valve body. This is the diaphragm-retaining nut.

在手轮下面，在一个旋进阀体的螺母上面是一套扳手面。这是横膈膜止动螺母。