全部

1·Twin-wire indirect arc gas shielded welding is a new welding technology.

双丝间接电弧气体保护焊是一种新的焊接方法。

2·Special configuration, can satisfy the airway by axial gas shielded welding workpiece and cooling.

专门配置的旁轴气道，能满足气体保护焊和冷却工件的要求。

3·In this paper, design principle on gun of automatic CO2 gas shielded welding with thick electrode is discussed.

论述了粗丝co2自动焊焊枪的设计原理，并对气流在焊炬中的流动情况和对熔池保护效果作了简要介绍。

4·Layer can be used to connect steel stamping forming diamond-shaped network, with gas shielded welding spot on the plate.

连接层可用冲压成型的钢质菱形网，用气体保护焊接方法点焊于钢板上。

5·The range of cleaning (width) shall not be less than 10mm for manual welding, not less than 20mm for gas shielded welding.

清理范围(宽度)对于手工焊不小于10 mm，气体保护焊不小于20 mm。

6·Because of the difference of arc circuit, the welding process of twin-wire indirect arc gas shielded welding is more stable than single wire welding.

由于电弧回路结构不同，双丝间接电弧气体保护焊的焊接过程比单丝焊更加稳定。

7·GA-1 reducer is used in quantitative output reducer for gas shielded welding and gas explosimeter. It has performance of pressure - reducing and gas flow control.

型减压器是用于气体保护焊与气体测爆仪的定输出减压器，具有减压、控制气体流量的性能。

8·It can provide several high performance welding modes, such as constant-voltage submerged arc welding, constant-current submerged arc welding, gas shielded welding and carbon arc air gouging.

它能提供多种高性能的焊接模式，如恒压埋弧焊、恒流埋弧焊、气保焊、碳弧气刨。

9·The joint microstructure and mechanical properties of high strength bainitic steel plate were studied by CO2 gas shielded welding(CGSW), submerged arc welding(SAW) and manual arc welding(MAW).

利用二氧化碳保护焊、埋弧焊、手工电弧焊研究了高强度贝氏体钢板焊接接头的组织和力学性能。

10·Fracture toughness of both shielded metal arc welding and gas metal arc welding is almost the same.

焊条电弧焊焊缝的断裂韧性与气体保护焊焊缝的断裂韧性相当。