全部

1·A driving sprocket for the chain is driven by a driving shaft.

一用于此链条的驱动链轮由一驱动轴驱动。

2·Each driving shaft on the bogie is driven by a traction motor.

转向架上的每个动轴均由一台牵引电动机驱动。

3·The casing of the electricity generating gear box covers the driving shaft.

发电齿轮箱的外壳包覆驱动轴。

4·The bicycle driving shaft is provided with an electricity generating gear box.

在自行车驱动轴上设置一个发电齿轮箱。

5·Critical rotary speed of the revamped driving shaft is also measured and analyzed.

并对改进后传动轴的临界转速进行了测定分析。

6·The failure of the driving shaft in a hoister is caused by typical brittle fracture under low stress.

卷扬机传动轴的断裂为典型的低应力脆断事故，主要原因是传动轴的组织疏松、晶粒粗大、。

7·The coupling is composed of two parts, which are respectively connected with the driving shaft and the driven shaft.

联轴器由两半部分组成，分别与主动轴和从动轴联接。

8·The sealing structure between the driving shaft (6) and the casing body (1) is sealed by adopting a packing set (7).

驱动轴（6）与壳体（1）之间的密封结构采用盘根（7）密封。

9·The universal adjustor and the driving shaft are respectively connected with an electrical apparatus control system.

所述万向调节器和驱动轴分别连接电器控制系统。

10·It includes driving shaft, helical spring, key way on the driving shaft, block, front stop unit, back stop unit, etc.

传动 轴、螺旋弹簧、传动轴上的键槽、滑块、前限位和后限位等部分。

传动轴

1·It adopts the newest type high-power transmission mechanism to arrange the chain and drive the main driving shaft. The errors and noises of other gear wheel transmission can be avoided.

采用国内最新型的大传动机构，由排链带动主传动轴，免除了其它齿轮传动的误差和噪音。

2·When valve is transporting, driving device and driving part should be hanging, avoid of damaging driving shaft because of larger force.

当阀门运输时传动装置及传动部位应悬空，以防止传动轴受力过大变形损坏。

3·This paper introduces the sealing and leakage preventative of oil tank, driving shaft, control mechanism, oil cylinder, spool, etc. in particular.

本文着重介绍了油箱、传动轴、操纵机构、油缸及滑阀等部件的密封防漏。

4·Considering the common failure features of driving shaft and common working condition, the mechanics analysis and finite element calculation were conducted.

针对传动轴常见失效特征，结合常用工况，进行了力学分析和有限元计算。

5·The bifurcation of main resonance can be removed by reducing the eccentricity and the order of main resonance and increasing damping of the driving shaft and intermediate supports.

可通过减小偏心距、降低主共振的阶数、加大传动轴及中间支点处的阻尼，使传动轴主共振不分岔。