全部

1·Transverse distance of containers according to a slot width of 2580 mm.

集装箱之间的横向距离是根据箱位宽度2580毫米而定。

2·The Mach number at cascade inlet increasing range was larger with the slot width increased.

缝隙宽度的增大使叶栅进口马赫数升高的幅度也越大。

3·Through model experiments, reasonable decouple coefficient range and slot width are gotten, and unsymmetrical dynamic strain field is analyzed.

通过水泥砂浆模型实验，得到了理想的名义不偶合系数与切缝宽度，测试分析了不均匀的动态应变场。

4·The diameter of machined hole and width of slot increased while energy increased.

加工孔径和槽宽随单脉冲激光能量增加而增大。

5·The influences of bend times, height, position, width and conductor size on resonant characteristics of slot antenna are analyzed.

分析了缝隙弯折次数、高度、位置、宽度和缝隙平片大小对缝隙天线谐振特性的影响。

6·Features: certain width coil paper automatic insertion to armature open slot, automatic graduation, automatic cutting off, PLC and touching screen operation.

特点：采用卷纸定宽度对电枢开口槽进行自动打入，自动分度，自动切断，PLC程控，触摸屏操作。

7·When the head's shape or width of central slot is unsuitable, central slot decreases critical flutter wind speed instead of increasing it.

当头部形状或开槽宽度不合适时，中间开槽不但不能提高颤振临界风速，反而降低了断面的颤振稳定性。

8·The longitudinal ends have a thickness that is greater than the width of the slot minus the height of the projection.

纵向末端的厚度，大于凹槽的宽度减去卡楯的高度。

9·The characteristics of PN code tracking-loop is discussed. The impact of parameters, e. g. correlation slot, integration time, loop width and SNR on code tracking performance is analyzed.

讨论了一种伪随机码跟踪环的特性，分析了码相关间隔、预检积分时间、环路带宽及信噪比等参数对码跟踪性能的影响。