全部

1·The relation of thermal and temperature of material is studied through thermal loading.

对热载荷加载研究了材料的应力与温度之间的关系。

2·Piston needs to be cooled efficiently with increase of thermal loading of diesel engines.

由于柴油机热负荷不断提高，必须要对活塞进行有效冷却。

3·The factors influencing the safety of the structure were summarized, and thermal loading was the most damaging.

分析总结了夹套结构安全的影响因素，指出温度载荷可影响设备的正常运行。

4·The research method and the results described in this paper will pro-vide a basis for thermal loading prediction of air-cooled diesel engines.

文中所论及的研究方法和初步结果可为风冷柴油机热负荷预测提供依据。

5·Thermal loading concentrated on the outer circumference of the discs during the engagement time may result in a form of conical deformation. Disc waviness may ar…

在离合器外齿片片内缘加载，接合时热负荷集中于片内半径区域，易引起离合器片的波浪形翘曲。

6·This thesis is on the basis of the research of diesel engine type 4135 etc, and the complete and systematic numerical modeling and malfunction simulation for thermal loading.

本文以4135柴油机等机型作为研究对象，对其热负荷进行了全面系统的数值模拟和故障仿真。

7·Using the solutions, the evolution processes of thermal consolidation for a cylinder under axisymmetric conditions are studied for both constant and variable thermal loading conditions.

利用这一解答，分析了常温度荷载和变温度荷载两种情况下圆柱热固结的演化过程。

8·Cause analysis of the water cooled wall tube burst focused on irrational points of design, excessive thermal loading, changes of coal category, burner defects and deposits in throttle valves.

着重从锅炉设计不合理、热负荷过高、煤种变化、燃烧器的缺陷及节流阀结垢等方面分析了水冷壁爆管的原因，指出必须进行锅炉改造。

9·A quantitative relationship between dynamic fracture toughness and temperature and loading rate has been obtained through thermal activation analysis.

通过热激活分析，可以获得定量描述动态断裂韧性、温度及加载速率之间的关系。

10·There is a fracture transition caused by loading rate. Through thermal activation analysis, a quantitative relationship was found.

通过热激活分析，获得了断裂激活能以及与温度和加载速率相关的定量化关系。