全部

1·Click on a vessel element to make it current.

点击导管元件使其(内部液体)流动。

2·With the increase of relative humidity, both length and diameter of vessel element increased, as well as the frequency of rays.

随着空气相对湿度的增加，导管分子长度和直径均增大，射线频率减小。

3·ObjectiveTo clarify the vessel element characteristics of Sophora japonica so to enrich the basic data of cultivation and resources survey.

目的澄清国槐导管分子特征，丰富其人工栽培及资源鉴定的基础性资料。

4·And the activity of PAL coincided with the increasing tendency of the Numbers of vessel element in the plumular axis or juvenile stem of robinia and its degree of lignification as well.

PAL活力与刺槐胚轴或幼茎的维管系统即导管分子的数量和木质化程度增长趋势相一致。

5·The process of vessel element ' s promotion, formation and connection in primary xylem of antirrhinum majus, a model plant, was observed through micropolariscope and bright - field microscope.

利用偏光显微镜和明场显微镜，首次报道了模式植物金鱼草幼苗初生维管系统木质部导管分子的发育、形成和连接过程。

6·The finite element analysis model of cylinder and vessel head structures was established.

建立了高压容器筒体与封头结构的有限元分析模型。

7·This paper applies the three-dimensional finite element method to the analysis of the stress for steam expanding vessel with tangential pipe, and the stress distribution has been obtained.

采用三维有限元方法对蒸汽扩容器与切向接管联接的关键部位进行了应力分析，获得了该部位的应力分布。

8·The proposed criterion is used to evaluate plastic loads in pressure vessel design by analysis using elastic-plastic finite element analysis to guard gross plastic deformation of pressure vessel.

通过接触单元来数值模拟啮合齿的接触过程，建立了基于整体有限元分析的齿啮式快开压力容器塑性载荷计算方法。

9·Using finite element procedure ANSYS, we analyze caisson gravity wharf acted by the vessel load in the static condition.

利用有限元分析软件ANSYS，对沉箱重力式码头在船舶荷载作用下的沉箱静态力学性能进行数值分析。

10·In this paper the finite element analysis is applied to simulate the elastic-plastic numerical value for the high-pressure full wrapped composite pressure-vessel.

本文针对高压全缠绕复合材料压力容器，应用有限元分析系统对其应力偏大的筒身应力进行了弹塑性非线性数值模拟。