全部

1·Solid solubility model of vanadium element in molten steel is established after theoretical analysis.

通过理论分析建立了钒元素在马氏体不锈钢中的固溶度模型。

2·The carrier concentration of surface after CO2 laser irradiation can exceed the solid solubility limit.

经过激光处理后样品表面一薄层载流子浓度超过了杂质的固溶度极限。

3·Limited solid solubility of transition elements in binary alloy phase diagram is studied by (using) atomic parameters and artificial neural network.

应用原子参数人工神经网络方法研究了过渡元素二元合金相图中的有限固溶度问题。

4·The non-linear relationship between proton conductivity and Y3+ content of sample is closely related with the oxygen vacancy, the defect association and the solid solubility of Y.

氧空位、 缺陷缔合和固深度均对样品的质子电导率与掺杂浓度有一定影响。

5·OBJECTIVE To improve the solubility and dissolution of nitrendipine by preparing its solid dispersions.

目的：制备尼群地平固体分散体，增加其溶解度和溶出速度。

6·CONCLUSION Itraconazole solid dispersion can significantly increase it's solubility and dissolution rate.

结论：伊曲康唑固体分散体能明显提高伊曲康唑的溶解度及体外溶出速率。

7·Objective To prepare solid dispersions of puerarin with polyethylene glycol 6000 (PEG6000) to improve its dissolution and solubility.

目的制备葛根素-聚乙二醇-6000（PEG6000）固体分散体以增加其溶出速率和溶解度。

8·Recognizing that the solubility of gas is greater in the liquid state than in the solid state, the subject of weld porosity is relevant to fusion zone discussion.

认识到溶解度的气体是更大的，在液体状态，比在固体状态下，受焊缝孔隙率是相关的熔合区的讨论。

9·It showed that X-ray diffraction technique was a good method for measuring solubility of solid solution, by which the solubility of many inorganic materials could be determined accurately.

结果表明：X射线衍射分析方法是一种测定固溶度的理想方法，这种方法还可以广泛用于无机材料固溶度的准确测定。

10·Methods: the solid dispersion was prepared by solvent method. The solubility, the dissolution rate and the derivative thermogravimetry (DTG) were determined.

方法：采用溶剂法制备固体分散体，进行溶解度、溶出速率测定，导数热重分析(DTG)。