全部

1·The testing routine is helpful to find a comfortable configuration format in engineering of dry friction damper.

所用实验方法有助于快速获得满足工程稳定性的减振结构参数。

2·The dry friction experiment showed that the wear resistance of the composite was greatly improved by electromagnetic stirring.

干滑动摩擦磨损实验表明：施加电磁搅拌后，复合材料的耐磨性能提高。

3·Compared with dry friction clutch, magnetorheological fluids clutch has little wear, small heat, long life, petty control current and easy controlled characteristic.

与干粉离合器相比，磁流变材料离合器磨损少、发热小、寿命长、控制电流小且易于控制。

4·Dimensionless dry friction damping factor is defined to measure the effect of dry friction damping, Finally, according to designed method, a vibration experiment of shrouded blades is carried out.

最后，按照设计的实验方案，对带凸肩叶片组试件做了振动实验研究。

5·Absorbency properties in the fabric help keep the skin dry and cool, providing further protection against friction and shear.

纤维的吸水特性有助于保持皮肤干爽凉快，为避免摩擦力和剪应力的伤害提供了进一步的保护。

6·When the humidity in the air content of more than 100%, the sealing ring bacteria get enough water, and the oxygen in the air friction and luminescence, dry after the disappearance.

在空气中的湿度含量达100%以上时，密环菌得到充分的水分，和空气中的氧元素磨擦而发光，干燥后即消失。

7·On dry surfaces, the front of a spinning sphere generates more friction than the back, and the sphere veers in a direction different from that of the rotational vector.

在干燥表面上，球体运动时前方受到的摩擦力比后方要大，且其旋转方向和滑行方向是不同的。

8·According to the friction and wear experimental results of dry slide of carbon steel, this paper analyses the relationships between the wearing amount, types of carbon steel and load.

根据对碳素钢进行的干燥滑动摩擦磨损试验结果，对碳素钢的磨损量、磨损形态与载荷的关系加以分析。

9·The article reports experiments which show that the maximum static friction force F on the surface of an aluminum rod inserted in the dry granular.

用实验方法研究了颗粒物质与探测棒之间的最大静摩擦力。

10·To compare the level of friction resistance (fr) of different design self-ligating brackets using various bracket-wire combination in dry state during orthodontic phase of leveling and aligning.

探讨在干燥条件下，在牙齿排齐整平阶段应用不同的自锁托槽与不同的镍钛圆丝组合所产生的滑动阻力。