全部

1·Technology characteristics of cold rolled sheet unit of Benxi Steel Posco Cold Rolled Co. , Ltd. ;

介绍了莱钢冷轧薄板（一期）工程的主要生产工艺、设备配置及先进技术。

2·Technology and installations for the production of cold rolled sheet at PZH Steel were introduced.

对生产中常见的低碳铝镇静钢冷轧板孔洞缺陷特征进行了宏观和微观分析。

3·Tinned sheet is cold rolled sheet whose surface is electroplated with a layer of uniform and dense tin.

镀锡板就是在冷轧板的表面电镀一层均匀致密的锡层。

4·High cleanliness is required for low carbon aluminum killed (LCAK for short) steel which is widely used for production of cold rolled sheet.

低碳铝镇静钢(LCAK)常用于生产冷轧板，要求铸坯有高的洁净度。

5·These housings (series p) are produced from cold rolled sheet steel and are protected against corrosion by a yellow chromate surface treatment.

这些轴承座(系列p)用冷轧钢板制造，表面经过黄色镀铬处理，以防腐蚀。

6·Porosity cluster of cold rolled sheet is transformed from scars, and it is critical to avoid collision for improving the surface quality of hot rolled strip.

避免钢板撞击精轧机组侧导板是消除结疤缺陷提高热轧板材质量关键因素之一。

7·Coil Packaging is a very important auxiliary process of the cold rolled sheet production. China has been falling behind developed-country in this technology.

钢卷包装是冷轧生产中很重要的辅助工艺技术，我国在这一技术上与世界工业发达国家相比落后很多。

8·The strip winding near the inner core of coil car has always been stripped while discharging coil since galvanizing mills put into operation in Angang Cold Rolled Sheet Plant.

鞍钢冷轧厂镀锌机组自投产以来，一直存在钢卷车在卸卷时发生内径抽芯卸卷失败等卸卷故障。

9·The difference of phosphate coating between aluminum alloy sheet and cold rolled sheet is compared by the test of chemical converted film and its structure on the surface of aluminum alloy sheet.

通过对铝合金板材进行的化学转化膜及膜结构的研究试验，对比了铝合金板与冷轧钢板磷化的异同点。

10·The mass concrete construction method for the equipment foundation in BX steel POSCO cold rolled sheet plant and technical measures for controlling its crack development were introduced in this paper.

介绍了本钢浦项冷轧薄板厂大体积混凝土设备基础的施工方法，以及控制其裂缝开展的技术措施。