全部

1·Replace the cylinder outlet seal and valve cap.

替换钢瓶排气口密封和阀门帽。

2·Secure the valve cap with a cable tie around the CAM ears.

在凸轮耳朵附近巩固与电缆扎匝的气门盖。

3·Unscrew the valve cap and set it to the side or in a pocket where you won't lose it.

拧下阀盖，并设置它的侧面或装在口袋里，你不会失去它。

4·Accumulator air-charging manifold Locate the Schrader air valve on the shock and remove the air valve cap.

蓄压器充气阀箱压缩空气瓶充气阀箱找到避震上的美嘴气阀，取下气阀帽。

5·Unscrew the Allen screw in the middle of valve cap and lift up the cap just enough to pick up the old diaphragm.

旋松阀帽中间的内六角螺丝，并且提起阀帽，正好足够拿走旧阀膜。

6·The company was founded in 2007, the main marketing car motorcycle engine oil seal oil seal fluoroelastomers Aprons high-pressure valve cap rubber tubing, etc...

本公司成立于2007年，主要营销汽车摩托车发动机油封氟橡胶汽门油封胶圈高压帽油管等各类橡胶件。

7·When returning cylinders to the supplier, properly close the cylinder valve, replace and secure any valve outlet seals, and properly install the cylinder cap.

钢瓶返还给供应商时，正确关闭钢瓶阀门，替换并固定阀门排气口密封，正确安装钢瓶帽。

8·The fitting of a heavy, three valve-cap on the Macondo oil well on July 15th marked the opening of just such a new act in the drama of the Deepwater Horizon, its loss and its aftermath.

7月15日，Macondo（马贡多）油井装上了一个沉重的三阀井盖，标志着深水地平线号这场戏剧（包括损失和后果）新的一幕的开始。

9·The single unit cap and lifting lever permit manual valve opening (testing) with low required force on the lever.

这种一体式阀盖和提升杆使得检测人员只需轻轻扳起测试杆即可人工手动开启阀门进行测试。

10·To adjust the setting of the valve, loosen locking cap screw with hex wrench, see Figure 3.

如果要调节阀门的设置，则利用六角扳手松开锁紧帽螺丝，参阅图3。