全部

1·As a mould board self organizing information is usually regarded as life.

通常将“模具自组织信息”看作生命。

2·Researched software development techniques based on UG, and established mould board parametric model and parametric drive mechanism.

进行了UG二次开发技术研究； 建立了模板参数化模型、模板参数驱动机制；

3·The research gives prominence to three main way of using earth, they are mould board building, rafter building, and earthen brick building.

文中着重对土作技术的三种主要建造方式：版筑法、椽筑法、土坯法进行研究。

4·Apply to: apply to: acid electroplated copper electric circuit board electroforming mould and electroplating for printing plate making etc.

适用于：酸性电镀铜、线路板、电铸模、制版电镀等。

5·To effectively reduce the injection-machine mould-board weight, sequential optimization design method starting from high level topology optimization to low level parameter optimization was proposed.

为了有效地降低注塑机模板的重量，提出了从高层次拓扑优化到底层次参数化优化的顺序优化设计方法。

6·In this paper, the fundamental, design idea and realization method of parametric design are introduced. The parametric design is applied to design of the board fixed on injection mould.

介绍了参数化设计的基本原理，设计思想和实现方法，并给出了参数化设计在模具固定板设计中的应用。

7·The result shows that the application of electro chemical machining can obtain the cladding which bonds well with matrix and meets the requirement for the mould for the forming of floor board;

研究结果表明：对于汽车地板革成形模，采用刷镀工艺可获得和基体结合良好，满足使用要求的修复镀层；

8·Artwork, advertising scutcheon, name plate, stamp, indication board, architectural model, decoration, industry mould, meter panel, millwork, relief sculpture, industry element, etc.

艺术品、广告标牌、铭牌、胸牌、印章、指示牌、建筑模型、装饰品、工业模具、仪表面板、木工制品，浮雕，仪表面板及工业元件等加工行业。

9·The upwards convex table board is formed by a secondary mould pressing and one-step molding method.

本发明的方法采用二次模压一次成型的方法形成上凸台面。