全部

1·Slot welding the 2nd side onto the divisions where there is not enough room for access to weld them on the inside.

槽焊接上的第二方面的分歧那里没有足够的空间进入焊缝他们在里面。

2·The elements can be put together in various ways. For example, a lap join may be held by a fillet, plug, or slot weld, and and a tee joint by a fillet or groove weld.

这些元素可以以不同方式组合在一起，例如：一个搭接接头可能用角接、塞焊和缝焊固定，一个丁字接头可以用一个搭接或槽焊来完成。

3·Proper gating in this slot area was the only way to avoid weld lines.

开口内采用适当的浇口是避开融接线的唯一途径。