全部

1·The clamping of the friction disk is caused by the outwardly rolling of the steel ball along the slop rolling track under eccentric force.

离合器摩擦片的压紧是由钢球在离心力作用下沿斜面滚道向外滚动而引起的。

2·Two beams of multi-fibers are used to transmit optical signals, and one particular structure is adopted to effectively eliminate the effect of eccentric force on the sensor output.

利用两根多模光纤束传输光信号，采用一种特殊的结构形式，能够有效地消除力偏心对传感器输出的影响。

3·Considering the inertial eccentric force and the weight of the drill string, we find that the axis critical force will be obviously less than that under the static state, which wil...

综合考虑钻柱惯性离心力和自重的影响，我们发现，在工作状态下，钻柱的临界压力会明显地小于静态时的临界力，这对实际的钻探工程来说具有十分重要的指导意义。

4·Consequently, the reciprocation mechanism can not only implement the advantage of multi-vibration frequency, but also thoroughly solves the bad vibration caused by the eccentric force.

因此该往复运动机构既有可实现多种震动频率的优势，又能彻底解决离心力形成有害震动。

5·The shocking moment after the complete balance of shocking force can get partial balance through the adjustment of eccentric gear in the attached mechanism.

振动力完全平衡后机构的振动力矩，可通过调整附加机构中偏心齿轮的回转中心得到部分平衡。

6·Layout of eccentric brake ring and its calculation of fine stamping force and structure design of die have been introduced.

介绍了偏心制动圈零件的排样、精冲压力计算及模具结构设计。

7·With adjustable eccentric pressure work piece applied on this welder, welding process is artificially controlled with proper current and upset force.

该系列对焊机采用可调的偏芯轮压紧工件的方式，选择合适的电流档位和顶锻力，人控焊接时间完成焊接过程。

8·The effects of eccentric mass, damping, inertia force and gravity on the vibration amplitude were analyze.

在此基础上，分析了质量偏心、阻尼、惯性力和重力对振幅的影响。

9·By taking advantage of rotating centrifugal force and the supporting effect of eccentric short drill collar, we cut off the axis inclination of bit, and avoid well inclination.

利用偏心钻具在旋转过程中的离心力和偏心短钻铤的偏重带的支撑作用，减小了钻头轴线倾角，从而减少了井斜。

10·When the resistive moment of surrounding soil is less than the torsional moment of eccentric jacking force, stability failure of pipeline occurs and pipes deviates from the designed axes.

管道失稳是由于管道周围土体提供的抵抗力矩小于偏心顶推力而产生的扭转力矩，造成管节偏离设计轴线。