全部

1·The invention relates to a thermoplastic corrugated tube processing device.

本发明涉及一种加工热塑波纹管的设备。

2·Experimental investigation shows that the heat resistance of fouling in corrugated tube is 0.

实验结果显示轧槽管的污垢热阻约为光滑管的0。

3·The heat transfer and flow resistance performance of corrugated tube heat exchanger were examined by oil, water, and steam.

采用油、水、水蒸气对波纹管换热器的传热和流动阻力性能进行了试验研究。

4·The result shows that heat transfer coefficient of corrugated tube heat exchanger is over 1.5 times than that of bare tube.

结果表明，波纹管换热器的总传热系数比光管高1.5倍以上。

5·A comparison and an analysis are made of the characteristics and situations of use of plate, corrugated tube and super conductive heat pipe exchangers.

对板式换热器、波纹管换热器和超导热管换热器的特点及使用场合进行了分析、对比。

6·Corrugated tube heat exchanger is one of new kind shell-and-tube heat exchanger which has good heat transfer, anti-scaling and self-compensation abilities.

波纹管换热器是一种新型强化管壳式换热器，具有传热性能好，防垢能力强且有自我补偿能力等优点。

7·The correctness of using periodic unit duct model to simulate the shell-side flow and heat transfer is confirmed for the first time, when using the corrugated tube.

本文首次验证了纵流壳程换热器选用波纹管作为换热元件采用单元流道模型对壳程进行数值模拟的正确性，同时验证了数值模拟结果的正确性。

8·The modification of a compressor intercooler was conducted by replacing the straight tubes of a shell tube heat exchanger with a new type of stainless steel corrugated tubes.

采用新型不锈钢波纹管代替壳管式换热器中的直管，对压缩机中间冷却器进行了改造，并进行了实际运行测试和比较分析。

9·This paper studies the performance of internal pressure blasting and external pressure squirm between smooth tube and corrugated tubes from the ANSYS finite element analysis and testing.

本文从ANSYS有限元分析和试验两方面分别对光管和波节管在承受内压爆破和承受外压失稳时的性能进行研究。

10·To improve the performance of heat transformer, a spirally corrugated tube in the absorber was used. And research for its heat and mass transfer performance was conducted experimentally.

为了提高在以溴化锂为工质的第二类吸收式热泵吸收器的性能，在第二类吸收式热泵吸收器内对不锈钢螺旋槽管，即不锈钢光滑管的传热传质性能进行了实验研究。