全部

1·Minimum of three tack welds.

最少有三个点焊。

2·Factory and site welds.

工厂及现场焊接。

3·Iron welds easily.

铁易焊接。

4·Then before I primer it I will do the welds.

然后之前，我引它，我会做的焊缝。

5·All welds shall be undetectable in finished work.

完成设备的所有焊接应无法探察。

6·Welds are marked in accordance with the procedure.

焊缝应按照程序进行标记。

7·The welds on the board are scanned with lasers for defects.

电子版上的焊缝会用雷射光来检查有没有瑕疵。

8·The body - bonnet welds are made on fully automatic MIG Welders.

阀体-阀帽的焊接工艺是采用完全自动化的mig焊接设备进行的。

9·A steady exchange of information welds them into a single system.

稳步的信息交流将它们焊接成一个单一的系统。

10·Round off al rough welds and sharp edges, remove al weld patterns.

对所有锐边和焊缝进行倒圆，打磨除去焊接飞溅物。

焊接

1·Using a laser, the robot can make highly accurate welds and position itself for each one a lot faster than it could if it were spot-welding in the normal way.

与传统方法相比，利用激光，机器人可以高精度高效率的完成焊接。

2·A steady exchange of information welds them into a single system.

稳步的信息交流将它们焊接成一个单一的系统。

3·These jigs are essential to ensure the best quality welds and the minimum of distortion during the welding process.

这些夹具是必不可少的，以确保最优质的焊接变形和焊接过程中最低。

4·All field welds and connections shall be clearly marked on the drawings. Design criteria, calculations and detail specifications shall also be submitted with the drawings.

全部的现场焊接和组装应在图纸中清楚的标出。设计标准，计算结果以及详细说明应与图纸一并呈递。

5·Hydroformed parts are stronger and weigh less due to structural integrity and fewer welds or add-on pieces.

内高压成形零件的强化，以及重量更轻，由于结构的完整性和减少焊接或添加件。

(1)weld seam焊缝

(1)weld metal焊缝金属

(1)weld pool焊池

(1)weld joint焊缝

(1)butt weld对接焊缝；对头焊接

(1)spot weld焊点；点焊（缝）