全部

1·Anti-static surface models using advanced anti-static coating, static resistance is 106-108 ohms, nice, strong corrosion resistance.

防静电机型表面处理采用先进的防静电烤漆，静电阻值为106 - 108欧姆，美观大方，耐腐蚀性强。

2·Also tested the properties of C18 alkyl betaine, such as surface tension, static resistance, emulsification etc, and compared with dodecyl betaine.

测试了十八烷基甜菜碱的表面张力、抗静电性、乳化性等应用性能，并与十二烷基甜菜碱进行了对比。

3·Anti-static surface models using advanced anti-static coating, static resistance is 106-108 ohms, nice, strong corrosion resistance., The color is black.

防静电机型表面处理采用先进的防静电烤漆，静电阻值为106 - 108欧姆，美观大方，耐腐蚀性强机型颜色为黑色。

4·In this method, the static resistance at pile toe can be calculated directly with the rebound at pile top and impulse duration from the acceleration signal at pile top.

在该公式中，桩端土的静阻力可以直接从桩顶的加速度信号中获得的桩顶回弹和冲击力持续时间计算得到，并且计算结果和土阻尼无关。

5·Distributive regularities of inner force of pile under static and dynamic load, the change of pile's side resistance, and settlement of piles are analyzed by static and dynamic load test.

通过单桩竖向抗压静载试验和动载试验，分析了静动载对桩身轴力分布、桩身侧摩阻力和基桩沉降的影响及其变化规律。

6·The unit operation, a solid particles of dust and impurities by gravity, inertia diffusion, contact resistance leave, static comprehensive effect, dust settlement piling up in filtering elements.

机组运行时，大量灰尘和固体颗粒杂质由于重力、惯性扩散、接触阻留、静电等综合作用，灰尘沉降堆积在过滤元件上。

7·Hence, for improving the uniformityof air supply and the performance of the duct, it is of great importance to studythe rules of resistance distribution in static pressure air supply duct.

研究静压送风道的阻力分布规律，对提高送风均匀性和改善送风道性能有重要意义。

8·General is due to the live system connector plug or circuit between the power-to-ground short-circuit caused by, at this point resistance measurement method can be static.

一般是由于带电拔插系统中接插件，或电路中电源对地之间短路而引起，此时可采用静态电阻测量法。

9·The influence of the tire characteristics, such as rolling resistance, static steering resisting moment and side slip etc.

研究轮胎滚动阻力、静态转向力矩和侧偏特性等因素对载重汽车性能的影响。

10·This paper described the consist of the resistance strain measure system and the approach of static calibration in detail.

详细介绍了电阻式应变测量系统的组成、系统静态标定的方法与步骤；