全部

1·Two reactors, one big steam turbine hall and cooling towers for heat removal.

2个反应堆，1个大蒸汽涡轮，还有除热量的冷却塔。

2·Heat removal system, residual heat removal and safety system functional failures.

热量消除热量消除系统，余热消除，和安全系统故障。

3·The residual heat removal system with natural circulation is a passive safety system.

采用自然循环的余热排出系统是一种被动安全的系统。

4·The necessary heat removal measures should be taken for the welding of thermal sensitive elements.

热敏元件焊接时应采取必要的散热措施。

5·Study on fire protection, waterproof, ventilation arid heat removal in the process is done as well.

探讨了通风安全防火、防水防雨、通风降温等在生产过程中的重要性。

6·This paper analyzes the process of decay heat removal after Chinese Experimental Fast Reactor (CEFR) scram.

分析了中国实验快堆事故停堆后余热的排放过程。

7·Main cause has been analyzed and it resulted from the inadequate heat removal of the steam condenser in gas compressor.

通过分析认为气压机凝汽器取热能力不足是造成真空度低的主要原因。

8·So the design differences are really driven by the mechanism of heat removal in the reactor and how that reactor is operated.

所以，设计的不同是由,除去反应堆热量的原理的不同决定的,还有反应堆运作的方式决定的。

9·You have a thermal margin low pressure trip which basically measures the amount or the efficiency of heat removal from the core.

你们会得到热量边缘，低压力差错，基本上测量了核心的热量除去的，数量以及效率。

10·But as long as the heat production exceeds the heat removal capacity, the pressure starts increasing as more water boils into steam.

但是，当产生的热量渐渐超过目前的冷却能力，会有大量的水变成水蒸气的状态，使内部的压力增大。