全部

1·Good yield strength and tensile strength.

良好的屈服强度和抗拉强度。

2·The statistic relation between yield strength and temperature is obtained.

并给出了屈服强度与温度之间的统计关系。

3·Q - the first letter of Chinese phonetic alphabet. 245 yield strength value.

Q—“屈”汉语拼音首位字母。245—屈服强度值。

4·Yield strength elongation-strain corresponding to yield strength of material.

屈服强度伸长—对应于材料屈服强度的应变。

5·The aim is to obtain a high yield strength, elastic limit and high toughness.

其目的是获得高的屈服强度，弹性极限和较高的韧性。

6·The yield strength and elastic modulus will decrease with the temperature increased.

温度升高，原子热运动加强，屈服强度和弹性模量降低。

7·The longitudinal yield strength and the Young′s modulus increase with the draw ratio.

纵向屈服强度和模量随拉伸比增加而提高。

8·It was obtained that the yield strength was increased as the strain rates were raised.

在讨论应变率变化时，获得了屈服强度随应变率增大而增高的结果。

9·When the pre-strain surpasses 0.95%, the reverse yield strength reaches to a constant.

当预应变超过0.95%时，反向屈服强度达到恒量。

10·Fatigue strength is less than static stress strength such as elasticity limit, yield strength.

疲劳强度低于弹性极限或屈服强度等静应力强度。