全部

1·The higher the carbon content, the slower this rate must be.

含碳量越高，冷却的速率必须越慢。

2·They will increasingly ask about the carbon content of their food.

他们会越来越多地关注食物的碳含量。

3·The carbon content of macerals increases with increasing temperature.

煤岩组分中的碳含量随温度升高而增加。

4·The cementite phases still increase with the increase of carbon content.

随着碳含量的增加，渗碳体相也相应增加。

5·Steel with low carbon content will not respond appreciably to hardening treatment.

含碳量低的钢对淬火处理没有明显的反应。

6·For all other materials, the minimum carbon content of the weld metal shall be 0.05%.

对所有其它材料，焊缝金属的最低含碳量应是0.05%。

7·The optimal middle annealing temperature increases with the increase of the carbon content.

合金的最佳中间退火温度随碳含量的增加而升高。

8·The influence of new brightener dosage on the carbon content of zinc deposit was discussed.

讨论了新型镀锌光亮剂的用量对锌镀层含碳量的影响。

9·Imports would have to be certified as to their carbon content, and would be taxed accordingly.

进口货物的含碳量将被检验并相应地征收税款。

10·Structural steels, Carbon content. Low-alloy steels. Ferritic and martensitic stainless steels.

结构钢，碳钢，低合金钢，鉄素体和马氏体不锈钢。

含碳量

1·And California has adopted a low-carbon fuel standard that will require oil companies to cut the carbon content of their petrol.

而且加州已经通过了低碳燃料标准，要求石油公司降低他们汽油中的含碳量。

2·The hardness obtained from a given treatment depends on the quenching rate, the carbon content, and the work size.

通过给定的热处理所得到的硬度取决于淬火速率、含碳量和工件尺寸。

3·For all other materials, the minimum carbon content of the weld metal shall be 0.05%.

对所有其它材料，焊缝金属的最低含碳量应是0.05%。

4·Compared with traditional austempered process, this new method would obtain much finer structure with nearly same volume fraction of retained austenite in matrix and carbon content of austenite.

与传统的等温淬火工艺相比，“两步法”组织得到显著细化，而基体组织中残余奥氏体体积分数及含碳量无明显不同。

5·The key to increase boiler efficiency is real - time and precise monitoring carbon content of fly ash.

提高锅炉运行效率的关键问题之一是实时、精确地监测锅炉飞灰中的含碳量。