全部

1·The system shows shear thinning and reversible shear thickening behavior.

实验结果表明，该体系具有剪切变稀和可逆的剪切增稠现象。

2·The results show that the mayonnaise processed by high pressure is a shear thinning flow.

结果表明，高压处理后的蛋黄酱是剪切稀化流体。

3·Results show that shear thinning behaviour and pseudoplasticity of aqueous slurries can be found.

结果表明：料浆均表现出剪切变稀行为，且为假塑性流体。

4·The paste has the rheological characteristics of slurry, such as thixotropism and shear thinning.

膏体具有料浆的触变性和剪切变稀等流变特征。

5·At the same time, the HAWP solutions appeared strong flow stress and obvious shear thinning phenomenon.

同时，溶液表现出明显的屈服应力和良好的剪切稀释性。

6·For solder paste with more small particles introduced, shear-thickening appears before the onset of shear thinning.

当小尺寸焊料添加达到一定量时，在剪切变稀开始前出现剪切增稠现象。

7·Faster injection (up to a point): less cooling during filling, hence a thinner initial frozen layer, lower viscosity due to shear thinning;

较快注塑（到点）：在填料过程中冷却较少，因此初始固化层较薄，由于剪应变稀少而粘性较低；

8·The polymer solution was manifested to show the property of shear thinning at low flow rate and shear thickening if the flow rate exceeded a point.

实验发现聚合物溶液在低流速下，表现剪切变稀，超过一定流速后，表现为剪切增稠。

9·Furthermore, the rheological properties of the gel systems were studied. The results show that the gel systems possess fine viscoelasticity and shear thinning property.

考察了低分子量阳离子瓜胶凝胶体系的流变特性，结果表明该体系具有良好的粘弹性和剪切变稀性。

10·As the non-newtonian shear rate increasing, the melt viscosity of the PP and their blends were decreased, and behave shear thinning, show the Pseudo-plastic fluid features.

随着非牛顿剪切速率的增加，PP及其共混物的熔体粘度明显下降，表现出剪切变稀现象，呈现假塑性流体的流动特征。