全部

1·Pin-on-disk wear test equipment set in S-570 SEM is introduced in this paper.

本文介绍了一种装在S - 570扫描电子显微镜中的销-盘式磨损试验装置。

2·The wear_resistant properties were examined by means of ring-block contact wear test.

采用环块接触形式进行材料的耐磨试验。

3·The best strengthening technological parameters was selected after ball-disk wear test.

球-盘磨损试验之后，找出最优的复合强化工艺。

4·The wear tests with ring on block wear test machine and corrosion tests were carried out.

用环块磨损试验机进行了磨损试验，并进行了腐蚀试验。

5·Usually if the shoe lever is 1 & 2, will also conduct wear test sample. No need for level 3.

通常，如果鞋子的级别为1 & 2， 必须生产试穿样品。 若级别为3 则没必要。

6·Wear and tear tests of the treated specimen are made by Brinell wear test machine, and the relation between wea...

以上处理的试样经磨损试验，得到了磨损率和机械性能的一些关系。

7·The wear test was carried on a nozzle which was made from carbides and ceramics on high pressure abrasive water-jet machine.

本文采用硬质合金和陶瓷材料制成喷嘴。在高压水设备上进行了磨损实验研究。

8·The method of grinding wheel wear test and error compensation is presented based on acoustic emission technique in this paper.

提出了一种基于声发射检测技术的砂轮磨损测量及加工误差补偿系统。

9·Aerial craft brake movable piece produced with new heat treatment process have basically met the special requirements of wear test.

运用该工艺生产的航空刹车副动片基本满足了磨损试验的特殊要求。

10·The X-ray diffraction was used to determine the structure of the coating surface. At last, the shock abrasive wear test was performed.

用X射线衍射分析方法测定了镀层表面结构并作了冲击磨料磨损试验。