全部

1·The effects of chloridization reactor, preheat temperature, chlorine flow rate, reaction temperature and reaction time on the conversion of chlorine gas were examined.

考察了氯化反应器、预热温度、氯气流速、反应温度及反应时间对氯气转化率的影响。

2·The effects of different process parameters such as laser power, scanning speed, preheat temperature, powder-bed depth on the sintered quality were studied systematically.

系统研究了激光功率、扫描速度、预热温度、铺粉厚度等工艺参数对成型试样质量的影响。

3·The effects of technical parameters to quenching result are researched, heat transfer coefficient, preheat temperature and quenchant temperature are regarded as the object variable.

结果表明，换热系数是影响淬火结果的主要因素，淬火介质的温度及零件的预热温度对于零件淬火后的性能影响很小；

4·It is found that there is a threshold energy density in laser doping, and distributions of dopant density and depth have relation to preheat temperature and plating layer thickness of the impurities.

激光掺杂存在一个阈值能量密度。掺杂浓度和深度的分布与预热温度和杂质镀层厚度有关。

5·It is sometimes beneficial to preheat a mold so that production can start with the mold already at its operating temperature.

它有时是有益的预热具，使生产就可以开始与具已经在其操作温度。

6·Finally, the detector's design is proposed in this thesis, separately including the lamp-house's preheat interval experiment, the temperature experiment, the gas density detect experiment.

最后，对本文设计的探测器进行了实验验证，分别做了光源预热时间实验、温度实验、气体浓度测量实验。

7·And preheat is advantage to reduce LBZ, and decreasing character temperature T1 and T3 are also helpful to prevent the happening of LBZ.

预热也有利于减少L BZ；另外，降低特征温度t1和提高特征温度t3也有利于预防l BZ。

8·A fresh air system with a preheat function can provide comfortable temperature of fresh air to keep the indoor temperature at the same time to achieve energy-saving purposes.

具有预热功能的新风系统，把温度适宜的新风引入，保持室内温度的同时又达到节能的目的。

9·The preheat oven is used to bring the pump up to the metal bath temperature.

进口工业网的预热烤箱是用来使泵送金属浴温度。

10·Cover and let rise at room temperature until almost doubled in size. Approximately 2 hours. Meanwhile, preheat oven to 325 degrees F (165 degrees C).

用塑料薄膜将卷好的一个个可爱的小羊角面团盖好进行二次醒发大概2个小时，同时将烤箱预热到325华氏度。