全部

1·The mass transfer coefficient in cyclone reactor was studied.

对旋流反应器的传质系数进行了研究。

2·The heat transfer coefficient is a perfect object variable to optimize.

在工艺参数优化时，换热系数是一个理想的目标变量。

3·Transfer coefficient — a coefficient used in simulating pollutant flows.

转移系数——一个用于模拟污染物流动的系数。

4·The heat transfer coefficient increased with the inner tube diameter decreased.

凝结换热系数随内管径的增大而减小。

5·Drop diameter distribution and mass transfer coefficient are briefly introduced.

对滴径分布和传质系数也作了简单介绍。

6·After that, the heat transfer coefficient is rapidly decreased with temperature decline.

当温度继续降低时，铸锭表面传热系数又迅速减小。

7·The heat transfer coefficient is obtained by solution of semi-infinity heat conduction theory.

用半无限大导热理论对瞬态导热过程进行换热系数求解。

8·The uncertainty in measured convective heat-transfer coefficient on lifting body model was about 15%.

升力体模型对流换热系数测量不确定度大致为15%左右。

9·An experimental correlation of the averaged heat transfer coefficient on the main surface is formulated.

根据实验结果给出了计算主盘表面平均对流换热系数的经验关系式。

10·The average evaporation heat transfer coefficient decreases with the increasing of the oil concentration.

不同含油率下，沸腾平均换热系数随质量含油率的增加而增加。