全部

1·According to the results of the inspection of track plate, fish plate, bolts etc. must be adjusted.

根据检查结果，可以对轨道的压板、鱼尾板、螺栓等进行必须调整。

2·Inspection distance between draught marks and keel plate after marking out.

划线后检查吃水标尺至平板龙骨之间的距离。

3·Our first order from Romania is for an 8 channel, 7 axis immersion unit for inspection of aluminium alloy plate .

我们在罗马尼亚的第一个订单是8通道，7轴水浸系统，用于检测铝合金板。

4·Four respects including roll selection, grinder situation, technique and inspection are controlled to ensure to grind roll accord with the rolling demand on O5 plate.

从轧辊挑选、磨床状态、工艺方法、检查等四个方面进行控制，确保了磨出符合O5板轧制要求的轧辊。

5·Inspection installation correctness of ship 'sname plate (funnel mark).

船名牌(烟囱标志)安装正确性检查。

6·This paper introduced the distribution and pattern of two conceal defects in explosive welding stainless clad steel plate and their ultrasonic inspection.

本文主要介绍了爆炸焊接不锈钢复合板中两种隐蔽性缺陷的形态、分布规律以及超声波检测。

7·The bending test is the necessary inspection item of titanium plate and welding joint for the manufacture of titanium vessel.

冷弯试验是钛容器制造中对铁板和焊接接头的必保检验项目。

8·Inspection installation correctness of ship's name plate (funnel mark).

船名牌(囱标志)装正确性检查。

9·And is shot rust-removing, by contrast, cost is high, inspection of the surface cleaning plate are very clean.

而抛丸清砂则相反，费用高，检验平板表面清理的非常干净。

10·By cleaning molten steel, controlling casting temperature and withdrawal speed, the compliance ration in ultrasonic inspection of plate was enhanced from 82.5% to 92%.

采取提高钢质纯净度、控制浇注温度和拉速等改进措施，检测合格率由82.5%提高到92%。