全部

1·This paper attempts to study the surface integrity of WEDM engineering ceramics and their strengthening by quenching.

研究了电火花线切割加工工程陶瓷的表面完整性及其淬火强化处理。

2·In this paper, the dressing methods for resin bonded CBNwheels and their effects on ground surface integrity are investigated.

本文就树脂结合剂cbn砂轮的修整方法及其对磨削表面完整性的影响进行了研究。

3·Finally, it is considered what specific measures should be taken to improve the surface integrity of titanium alloy in broaching.

分析了为提高钛合金拉削的表面完整性所应采取的措施。

4·The results show that reasonable process parameters are help for better surface integrity of machined workpiece and decrease wears in the tool.

研究结果表明，选取合理的工艺参数能提高工件表面精度和减少刀具的磨损。

5·For common hollow sections, welding lines on the surface are inevitable due to their forming characteristics, which damage their surface integrity.

对一般的空心型材制品，由于挤压成形本身的工艺特点，不可避免的会在产品表面产生挤压焊合线，影响到产品的表面质量。

6·The experimental results show that the efficiency of EDMG is 3 times as high as that of grinding, and the surface integrity is close to that of grinding.

实验结果表明，该复合加工技术的加工效率是机械磨削加工的3倍左右，并且加工表面质量与机械磨削相近。

7·The cutting temperature play an important role in the high speed cutting process, concerning about the tool wear, workpiece surface integrity and machining precision.

切削温度与刀具磨损、工件加工表面完整性及加工精度密切相关。

8·This paper discusses the burn of ground surface layer in the view of surface integrity and demonstrates that the governing factor of influence is grinding temperature.

本文从加工表面完整性观点讨论了磨削表面层烧伤的实质，指出影响烧伤的主导因素是磨削温度。

9·The surface roughness, pitting corrosion, burn and hydrogen uptake of ECM machined Ti-alloy blades are analyzed and the measures of improving surface integrity are introduced.

本文就钛合金叶片电解加工后的表面粗糙度、点蚀、烧伤及吸氢等问题进行了分析并提出了改善钛合金电解加工表面完整性的措施。

10·The principle of the vibration cutting is discussed. It is pointed out that the vibration cutting is an important method to improve the machined surface integrity of components.

讨论了振动切削的原理，指出振动切削是提高零件加工表面完整性的重要方法。