全部

1·Clutch pressure plate is a main part of an automobile.

离合器压盘是汽车的主要零件。

2·The clutch pressure plate is generally made of cast iron.

离合器压盘通常是用铸铁制成。

3·The clutch disc fits between the flywheel and the pressure plate.

离合器盘和飞轮之间的适合的压力板。

4·The clutch disc fits between the flywheel and the pressure plate.

离合器片安装在飞轮和压盘之间。

5·Turn around and you should see two small boxes and a pressure plate.

回头，你应该看到两个小盒子和一个压盘。

6·Diaphragm spring pressure plate assemblies are widely used in most modern cars.

膜片弹簧压盘组件广泛应用于在现代车辆上。

7·To examine diaphragm, disassemble coupling nut (6) and lift off pressure plate (7).

检查隔膜，拆卸连接螺母(6)并提升压力板(7)。

8·The two primary types of pressure plate assemblies are coil spring assembly and diaphragm spring .

有两个基本类型的压盘是螺旋弹簧组压盘和膜片弹簧压盘。

9·To replace the relief valve disc, hold the upper guide fin and unscrew the diaphragm pressure plate.

要更换安全阀阀瓣，握住上部引导翼，旋下隔膜压力板上的螺丝。

10·Loosen and remove the diaphragm lock nut and lock washer, pressure plate and diaphragm from the valve stem.

松开和拆卸隔膜锁紧螺母和锁紧垫圈，从阀杆上往下压阀盘和隔膜。