全部

1·It measures the viscosity change of an aqueous suspension of flour as a function of temperature.

它测定的是面粉的含水悬浮液的粘度变化与温度的函数。

2·High isotactic polybutene-1(HIPB-1)was chlorinated by aqueous suspension method. Chlorination products CHIPB-1 were tested and analyzed through DSC.

采用水相悬浮法氯化高全同聚丁烯-1（H IPB-1），其氯化产物氯化高全同聚丁烯-1（CHIPB-1）通过差示扫描量热法进行测试和分析。

3·Using redox system as initiator, copolymerization of acrylonitrile(AN) and methacrylate(MA) was carried out via the method of aqueous suspension precipitation polymerization.

采用水相悬浮沉淀聚合法，以氧化还原体系为引发剂，合成了丙烯腈（AN）与丙烯酸甲酯（MA）的共聚物。

4·The new forms include inks for screen-printing of ceramic cathode and anode materials, and a YSZ electrolyte in an aqueous suspension formulated for ultrasonic spray coating.

这些新形态材料包括，用作陶瓷阴阳极材料、丝网印花的油墨和用于超声波喷涂的水悬浮液内的YSZ电解质。

5·The effects of anionic polymer dispersant with different structures on the electrostatic and steric repulsion forces between particles in the aqueous suspension are mainly studied.

着重研究了不同结构的阴离子聚合物分散剂对悬浮液中颗粒间的静电斥力和空间斥力的影响。

6·For inverse suspension polymerization, water soluble monomer is dispersed in oil continuous phase and initiated in aqueous phase.

反相悬浮聚合是将水溶性单体分散在油溶性介质中，水溶性引发剂溶解于水相中进行聚合的方法。

7·ObjectiveTo study on the preparation of Shenmai aqueous capsule suspension and quality evaluation.

目的研究生脉微囊悬浮剂的制备和质量评价。

8·The suspension polymerization of DMAHPMA has been carried out easily and successfully in 10% NaCl aqueous solution without any addition of suspension stabilizers.

DMAHPMA在10％的盐水溶液中，不加悬浮稳定剂，即能成功地进行悬浮聚合。

9·The technological feasibility of SO2 removal from tail gas of single-absorption H2SO4 plant with aqueous pyrolusite suspension as absorbent and commercial MnSO4 as byproduct is examined.

研究用软锰矿的水悬浮液脱除一转一吸硫酸生产尾气中的SO 2并副产工业硫酸标的工艺可行性。