全部

1·It is shown that the compliance method for determining the delamination size in DCLS specimens is not only convenient and practical but also accurate.

结果表明，用柔度法测定dcls试样的分层尺寸，不仅测量结果准确，而且简单易行，避免了光测法的诸多麻烦和精度低的缺点。

2·The low temperature thick-wall GRP pipe of the present invention has no delamination, and has excellent mechanical property and heat isolating performance.

用本发明所述的方法制作低温厚壁玻璃钢管，不会出现分层现象，且具有良好的力学性质和隔热性能。

3·In this paper, the manufacture process, the mechanical and delamination properties of several kinds of fiber reinforced aluminium laminates have been studied.

本文初步探索了几种纤维增强铝合金胶接层板的成型工艺，并评定了这些层板的力学性能和抗分层性能。

4·First of all, the internal reason for the delamination or cracking is the different CTE of the packaging materials and the low surface energy of the adhesions.

塑封集成电路因其是非气密性封装，封装材料热膨胀系数的不同以及被粘接材料表面能低，是造成塑封电路离层或开裂的内部原因。

5·The tensile damage behavior involves:matrix microcracking, transverse bundle cracking, interfacial debonding, fiber fracture, ply delamination and bundle splitting.

拉伸破坏损伤表现为：基体开裂，横向纤维束开裂，界面层脱粘，纤维断裂，层间剥离和纤维束断裂。

6·Uncut layers in front of drill is called remaining layer, and its distribution of stiffness is the key factor to determine the delamination shapes of the interplies.

将钻头前端未切削的工件材料部分定义为叠合层，指出叠合层的刚度分布情况是决定各个层间分层形状的关键因素。

7·Predicting residual compression strength of composite laminates with delamination is a very important research subject for Engineering composite structure designers.

准确预测含分层损伤层合板的剩余压缩强度，对复合材料具有十分重要的意义。

8·The wear mechanism of C/C composites in braking have been inquired , they were abrasion, delamination of part of the friction film, oxidation wear and adhesion wear.

探讨了C／C复合材料的磨损机理，主要有磨粒磨损、剥层磨损、氧化磨损、粘着磨损。

9·We used embedding medium to cover lipid of pumpkin seed, emulsifier and stabilizer to settle delamination of pumpkin seed serum, the effect of powder was fairly good.

采用包埋剂包裹瓜子仁中的油脂，乳化剂、稳定剂解决瓜子浆中蛋白质和脂肪的分层问题，获得了理想的成粉效果。

10·The change in critical load value of both composite laminate plates with embedded and through-width delamination shows the same pattern for various delamination size.

对不同的脱层损伤尺寸，层合板分别有整体、混合和局部三种屈曲模态，穿透脱层和埋藏脱层的层合板其临界载荷的变化规律是相同的。

分层

1·Electrolyte: in gel state, no delamination, battery electrolyte circulation performance is good; The electrolyte density low, slow on board gate corrosion, floating battery life is long.

电解质：呈凝胶状态，电解液无分层、电池循环性能好；电解液密度低、减缓对板栅腐蚀，电池浮充寿命长。

2·The delamination crack and its effect on the fracture of pipeline steel were investigated by drop-weight tear test(DWTT)at different temperature and micrograph analysis.

通过对管线钢不同温度的落锤撕裂试验和微观断口分析，研究了DWTT试样断口的分层裂纹及其对断裂的影响。

3·Uncut layers in front of drill is called remaining layer, and its distribution of stiffness is the key factor to determine the delamination shapes of the interplies.

将钻头前端未切削的工件材料部分定义为叠合层，指出叠合层的刚度分布情况是决定各个层间分层形状的关键因素。

4·Lamination teaching's protophase adequate preparation and scientific management after delamination are the keys of the modes can success and having good teaching quality.

分层教学的前期充分准备和分层后的科学管理是该教学模式成功及教学质量保证的关键。

5·The invention extends to the use of a semiconductor photocatalyst as a top-coat to primer adhesion promoter or as a primer to top-coat delamination inhibitor in a primer coating composition.

本发明延伸至半导体光催化剂在底漆组合物中作为面涂层对底漆层的附着促进剂或者作为底漆层对面涂层的分层抑制剂的用途。