全部

1·Mundry USES the same principle for three layered systems with linear expansion or rotational symmetry.

穆恩德瑞将同一原理应用于具线性延伸或转动对称的三层状系统。

2·The measurement of micro deformation is the key in Youn Modulus and linear expansion coefficient experiments.

在杨氏模量、金属线胀系数实验中，微小形变量的测量是关键环节。

3·Results show that the linear expansion coefficients of D1 has large difference with that of single-base propellant.

结果表明，D1和单基药的热膨胀系数有较大的差异，中止燃烧破孔率常温小于低温。

4·Can be installed in cryogenic liquid is lower than the environment temperature linear expansion coefficient test test.

可装低温液体进行低于环境温度的线膨胀系数测试试验。

5·The theory and feasibility is analyzed, for measuring Linear Expansion Coefficient of high temperature material by moiré interferometry.

分析了激光云纹干涉法测量高温材料热膨胀系数的原理和可行性。

6·A very low linear expansion coefficient sample carrier made from invar ensures that temperature change has no effect on the sample position.

由不胀钢制成非常低膨胀系数的样品载台保证温度变化对样品的位置没有影响。

7·Based on a lot of experiments, the change range and average value of the linear expansion of polyurethane at low temperature have been given.

在大量实验的基础上给出了聚氨酯硬泡沫塑料低温线胀的变化范围和平均值。

8·The effect of vacuum thermal cycles on the linear expansion coefficient profile was analyzed using a proposed two-dimensional model of micro-damage.

通过所建二维细观损伤模型分析了真空热循环次数对材料线膨胀系数曲线影响的原因。

9·Coefficient of linear expansion of metal and density of liquid are measured by the experiment device which is composed of AC bridge and Joly spring balance.

利用交流电桥和约利弹簧秤组成实验装置，测量了金属的线胀系数和液体的密度。

10·The authors recommend a way for estimating the percentage of pinhole in solidified aluminum alloy by measuring its free linear expansion during the solidification.

研究一种快速测报铝合金针孔度的方法。该方法是在铝合金凝聚固过程中，通过测量其因氢析出所产生的自由线膨胀而进行针孔度预测的。

线膨胀

1·The coefficient of linear expansion of the body and glaze, the melting temperature range, the whiteness, the microhardness and the heat stability of glaze were tested.

测试了基体和熔块的线膨胀系数、釉的熔融温度范围、釉面的白度、显微硬度和热稳定性等性能。

2·In addition, statistical and deterministic mathematical models are used for back analysis of equivalent temperature linear expansion coefficient based on the prototype monitoring data.

此外，基于原型观测资料，利用统计模型和确定性模型对碾压混凝土的等效温度线膨胀系数进行了反演分析。

3·This problem could be well resolved by adopting improved steel tape precise test method and actual linear expansion coefficient, as well as self-made testing apparatus and tools.

采用钢尺精密检定的改进方法及钢尺实际线膨胀系数检测方法，加之自制的检定器具、设施，可较好地解决钢尺自身准确性问。

4·The effect of vacuum thermal cycles on the linear expansion coefficient profile was analyzed using a proposed two-dimensional model of micro-damage.

通过所建二维细观损伤模型分析了真空热循环次数对材料线膨胀系数曲线影响的原因。

5·The authors recommend a way for estimating the percentage of pinhole in solidified aluminum alloy by measuring its free linear expansion during the solidification.

研究一种快速测报铝合金针孔度的方法。该方法是在铝合金凝聚固过程中，通过测量其因氢析出所产生的自由线膨胀而进行针孔度预测的。