全部

1·New vacuum gun and antistatic soldering iron dual function.

真空吸锡枪及防静电烙铁的全新双功能组合。

2·The litz that I have can be easily tinned by using a hot soldering iron and solder.

用电烙铁和焊锡可以很容易的给李兹线上锡。

3·Vacuum gun and 24v soldering iron have good protection of PCB by antistatic design.

吸锡枪及24v烙铁为防静电设计，有效保护线路板。

4·Open the ld short lands quickly with a soldering iron after a circuit is connected.

短路焊接，在接通回路时，请快速使用焊锡。

5·The design of absorb tin gun and soldering iron is lightweight, suitable for prolonged use.

吸锡枪及焊铁设计轻巧，适合长时间使用。

6·Heat up your soldering iron and tin it by allowing it to melt a drop of solder onto its tip.

加热你的电烙铁，通过允许其热量融化的一滴锡滴在它的尖端来锡化它。

7·Works of this category mainly involve two types of material, i. e. ceramics and soldering iron.

这类作品，主要是陶瓷和焊铁两种材料。

8·It's very wise to keep a soldering iron, a roll of solder and desoldering equipment handy at all times.

身边总是有垂手可得的电烙铁和拆焊设备是十分明智的。

9·Add a soldering iron, wires, and your open PSP, the chance that something could go wrong is very high.

增加焊铁，电线，和你的开着PS P机会某事可以出毛病非常高。

10·Soldering iron should be kept in a suitable distance from vinyl sleeve of capacitor in order to avoid sleeve crack.

电烙铁应与电容器塑胶套管保持适当距离，以防止过热造成塑胶套管破裂。

烙铁

1·Adjust and replace defective or improperly functioning circuitry and electronics components, using hand tools and soldering iron.

使用手工具和烙铁来调整和更换损坏或不当运作电路和电子元件。

2·The Japanese use a hot piece of iron like an old-fashioned soldering iron to burn away the fluffy material from inside the quill.

日本人使用一片类似于老式烙铁的热铁片将羽茎内部的松软物质烧掉。

3·New vacuum gun and antistatic soldering iron dual function.

真空吸锡枪及防静电烙铁的全新双功能组合。

4·The head center of the soldering iron head is provided with a centering pin positioned at the center point of the circular ring circle and rising a little altitude than the circular ring plane.

在所述烙铁头的头部中心有一定心针，该定心针位于圆环的圆心处，高度略微高出圆环平面。

5·Do not touch the components in the PCBA in order to prevent from destroying the board when use the wire, soldering iron.

使用中注意引线头、烙铁等不要碰到电路板上的元器件，否则有可能损坏本电路板。