全部

1·In lower part of furnace shaft, the condition of coke gasification biases increasingly towards IEand leads to deterioration of coke.

在炉身下部其气化条件促使焦炭深部蚀损加剧，导致焦炭的恶化。

2·Particularly suit the field of furnace shaft thermal burden difference in water temperature, or the field of sequentially multiple points measuring.

特别适合高炉热负荷水温差测量领域，或者连续多点温度和温差的测量场合。

3·The liningless cupola is featured by that the furnace shaft, except the hearth section, is not lined but substituted by a heat-exchanging jacket (HEJ)which is made of heat-resistant metal.

无炉衬冲天炉的特点是炉体除炉缸部分外，不用炉衬，代之以耐热金属材料制成的炉胆；

4·The shell of the trolley type resistance furnace is cylindrical, and the inside is a vertical shaft furnace made of refractory bricks.

台车式电阻炉的外壳呈圆筒状，内部是由耐火砖砌成的竖井式炉膛，所以台车式电阻炉因此而得名。

5·In recent years, finger shaft arc furnace developed by FUCHS got an important position in the field of arc furnace steelmaking.

在电弧炉炼钢领域，德国FUC HS公司开发的手指式竖炉电弧近年受到了普遍的重视。

6·Copper cooling plate is installed in the bosh, belly and shaft of blast furnace, is an important element of metallurgical blast furnace.

高炉铜冷却板是高炉的重要冷却元件，安装在高炉炉体的炉腹、炉腰、炉身等部位。

7·Therefore, fruitful research have been carried out according to the main line of practice and theory of directly producing master alloys by a shaft furnace.

因此，围绕着竖炉法直接冶炼不锈钢母液的实践和理论研究这一主线，开展了卓有成效的研究工作。

8·A simplified raceway model of the shaft furnace was build based on the force balance at the raceway border and by considering the influences of flame temperature and effective raceway diameter etc.

基于回旋区边界上力的平衡，并考虑理论燃烧温度和有效直径等的影响，建立了同类型竖炉风口回旋区的简化模型。

9·In shaft furnace, gas is always desulphurized by charge.

在竖炉试验中始终是炉料对煤气进行脱硫。

10·Reaction behavior and distribution of sulphur during direct reduction in shaft furnace are studied in this article.

研究了竖炉直接还原过程中硫的反应行为和分配规律。