全部

1·The original external diameter of lateral plantar artery is 2.

足底外侧动脉始端外径，男性为2。

2·Height, Internal Diameter, External Diameter out of specification.

高度，内径，外径与规格不符。

3·This paper defines the curve triangle and its internal diameter and external diameter.

定义了曲线三角形及曲线三角形的内径与外径，并给出了它的内径和外径公式。

4·This paper defines the curve triangle and its internal diameter and external diameter.

这篇论文介绍如何使用三角曲线进行轨迹合成。

5·Dissection the superficial branch of superior gluteal artery and measurement its external diameter;

解剖臀上动脉的肌皮穿支并测量其外径。

6·The external diameter of the middle part of each guiding expansion head is larger than that of the through pipe.

导向扩张头中部的外直径大于通管的外直径。

7·Fit the dial gauge with some preload and measure the lateral runout at the greatest external diameter of the brake disc.

在带有一定预载的情况下安装百分表，然后测量制动盘最大外径处的横向跳动。

8·A new reflection method to measure the external diameter and the thickness distribution of the quartz tube is described in this paper.

本文介绍了反射法测量石英管外径及壁厚的原理和方法。

9·A metal ball can be absorbed by the magnet when the ball falls down. Its external diameter is larger than the diameter of the control mouth.

及一金属圆球，可脱落地受该磁铁磁性吸附，其外径系大于管制口的口径。

10·The external diameter of the branches of the internal iliac artery measured on cadavers was significantly smaller than that on patients alive.

在尸体上所测盆腔内中、小血管直径较动脉造影结果小，有显著差异。

外径

1·Fit the dial gauge with some preload and measure the lateral runout at the greatest external diameter of the brake disc.

在带有一定预载的情况下安装百分表，然后测量制动盘最大外径处的横向跳动。

2·Results: (1) the position and external diameter of peroneal artery, its accompanying vein and the distribution of fibular nutrient artery were observed.

结果：(1)观测了腓动脉及其伴行静脉起点的位置和外径及腓骨滋养动脉的分布。

3·The original external diameter of lateral plantar artery is 2.

足底外侧动脉始端外径，男性为2。

4·Dissection the superficial branch of superior gluteal artery and measurement its external diameter;

解剖臀上动脉的肌皮穿支并测量其外径。

5·The adopted technology scheme is: the reactor 2 adopts the straight tube with large external diameter and thin catalyst. The evaporating superheater 16 has the tubular structure.

所采用技术方案是，反应器2采用大外径、薄催化剂层的直管状，蒸发过热器16为列管式结构。