全部

1·Remove one socket pin head screw, three socket head bolts and gear operator cover.

拆卸一个灯头钉头螺丝，三个套筒头螺栓和齿轮执行机构盖。

2·Unplug the jack carefully examined, D-type socket pin bends whether or Broken Needle?

拔下插口仔细检查，D型插口中是否有弯针或断针？

3·Remove one socket pin head screw (c), three socket head bolts (d) and gear operator cover (e).

拆卸一个灯头钉头螺丝(C)，三个套筒头螺栓(d)和齿轮执行机构盖(E)。

4·It is possible to establish a connection between the pin of a plug and the hole of a live socket while the other pin is accessible.

这是可以建立一个套接字连接的引脚之间的插头和生活的一个洞，而其他引脚访问。

5·Now look at the socket on the motherboard: this socket should have a missing hole or should have a 1 indicating pin one.

现在，观察一下主板上的插槽：该插槽应当有一个盲孔或是一个数字1来指示针1的位置。

6·Is it a two-pin socket?

是两脚插头的插座吗？

7·There was enough room for a nine pin valve socket to accomodate the 12AT7 required, and the power supply suited.

一个九大头针活瓣插座有充足的房间容纳 12 AT7 必需的，而且以电力驱动的补给适合。

8·Socket for mounting and electrically connecting our 8 pin timer relays. DIN rail or screw mountable.

这款继电器插座可安装和链接8针继电器。

9·Because of the pin adapter with the motherboard CPU socket is the same pin 370-pin (Figure 1), so I intend to use the adapter to replace the motherboard CPU socket.

因为转换卡的针脚同主板的CPU插座的针脚同样是370针(如图1)，所以我打算用转接卡替换主板上的CPU插座。

10·Dust can easily lead to poor contact socket and board, in addition, some CARDS on the motherboard, the form of chip pins, and is often due to oxidation and poor contact pin.

灰尘很容易引发插槽与板卡接触不良，另外，主板上一些插卡、芯片采用插脚形式，也常会因为引脚氧化而接触不良。