全部

1·Replace wool? And check the contact pressure.

更换羊毛？并检查接触压力。

2·The main measuring method of tire contact pressure is using stress sensor.

轮胎接地压力测试方法主要是压力传感器法。

3·Contact pressure induction protective device, ensures the stable pressure in the chamber.

压力自动保护装置，确保研磨腔内压力均稳。

4·The specific wear rate is strongly dependent on the temperature, atmosphere and contact pressure.

比磨损率也与温度、气氛和接触压力密切相关。

5·Fuji pressure-sensitive film was used to record the contact pressure and area for each testing condition.

使用富士压力感应胶片记录接触应力和每个检测条件区域。

6·The calculated results indicate that the axial distributions of the maximum contact pressure have an s shape.

结果表明，最大压应力轴向分布呈S形，原辊形会引起接触应力集中。

7·Pressure the General Assembly to premature seal failure, and the contact pressure is too small will cause leakage.

压力过大会促使密封过早失效，而接触压力过小则会引起泄漏。

8·The effects of contact pressure, internal energy and damage dissipation energy on the impact response were analyzed.

分析了接触力、加筋壁板吸收能量和损伤散逸能对冲击响应的影响。

9·In the default model the friction coefficient is defined as afunction of the equivalent slip rate and contact pressure.

在默认模型里，定义摩擦系数为等效滑移率和接触压力的函数。

10·The technique of directly measuring the contact pressure was employed and the method compared with the indirect method.

该方法是采取直接测量接触压力分布技术，并与间接测试方法进行了比较。