全部

1·Check the bearing clearance of windlass and winch.

检查锚机及绞车的各轴承间隙。

2·Measure bearing clearance of antifriction bearing and find mean value.

测量减摩轴承轴承间隙并找出平均值。

3·Work clearance refers to the bearing clearance under actual operating conditions.

工作游隙是指轴承实际运转条件下的游隙。

4·The sorting results have direct influence on bearing clearance quality and assembly efficiency.

分选效果如何将直接影响到轴承游隙质量和装配效率。

5·Similarly, in the crankshaft journal and crankshaft bearing clearance measurements, they can draw on such skills.

同样，在进行曲轴轴颈和曲轴轴承配合间隙的测量时，也可以借鉴这种操作技巧。

6·Cylindrical bore bearing is usually installed with heat, reduce the use of interference fit bearing clearance, or achieving the purpose of pretension.

圆柱孔轴承通常采用热装，利用过盈配合减小轴承游隙，或者达到预紧的目的。

7·Bearing clearance, not only finished products bearing support of one of the main parameters of accreditation component, but also carry an important factor.

轴承间隙后，不仅成品轴承支撑的资格认可的主要参数之一组件，而且还可以承载的一个重要因素。

8·Guide bearing clearance is too small, the vibration of the rotating shaft will be transferred to the bearing and foundation, the bearing clearance is too large, the rotating shaft vibration.

导轴承空隙过小，会把转动轴的振动传给支座和基础，导轴承空隙过大，转动轴振动大。

9·Measuring installation clearance of rudder bearing.

舵轴承安装间隙测量。

10·This paper presents a new method for detecting the axial clearance of a bearing by a single chip processor 8098.

本文提出使用8098单片机实现轴承轴向间隙检测的新方法。