全部

1·A concept of equilibrium temperature interval is used to estimate kinetic attributes of reactions.

引入平衡温距的概念来估计反应的动力学属性。

2·The results showed that the solid liquid phase zone, temperature interval and segregation degree may be obviously enlarged with increasing s content so as to reduce the hot plasticity of the alloy.

结果表明，随着S含量的增加，导致固液两相区、温度范围和偏析程度明显加大，引起合金的热塑性降低。

3·The interval of the coating time is determined by the temperature at the time of construction and the degree of curing of the film (by hand).

重涂时间的间隔，由施工时的温度和涂膜固化的程度（以手触不粘）来确定。

4·With the steel line and the solid phase of the high and low liquidus temperature and crystallization temperature of the size of interval.

它们与钢的固相线和液相线温度的高低及结晶温度区间的大小有关。

5·Function description: quicken the cooling of rubber mould; shorten the interval time of using the mould (increase the output); reduce the high-temperature bearing time (lengthen the service life).

功能描述：加快橡胶模具的冷却、减少模具再次使用的间隔时间(提高产量)、减少高温承受时间(使用寿命更长)。

6·The Interval load Method was adopted to study the relation between the molecular motion of amorphous PMMA and temperature.

采用间歇加力试验法研究非晶聚合物材料pmma的分子运动-温度关系。

7·The effect of quenching temperature, the interval time from quenching to aging and aging institution to 2A70 aluminium alloy pre-stretching plate structure and properties are introduced.

介绍了固溶处理温度、淬火到时效间隔时间及时效制度等对2A70铝合金预拉伸厚板组织和性能的影响；

8·Effects of hormone dosage, interval time of hormone injection, oestrus period, season and temperature influenced on mouse superovulation were studied in this experiment.

分析了激素剂量、激素注射间隔时间、发情周期、季节和温度对小鼠超排效果的影响。

9·Measures of crevices preventing such as the control of temperature and interval of expansion joint are given forth.

提出了温度控制与伸缩缝最大间距控制等防止引起裂缝的措施。

10·According to the feature of SLS, the parameters of interest are layer thickness, hatch spacing, laser power, scan speed, work surroundings temperature, interval time and scanning mode.

根据SLS加工工艺的特点，研究的工艺参数包括：层厚、扫描间距、激光功率、扫描速度、环境温度、层与层之间的加工时间间隔和扫描方式。