全部

1·The abrasion wear mechanism of Mn copper-nickel alloy matrix-cast chromium carbide composite was studied.

研究了真空熔铸法制备的锰白铜基铸造碳化铬复合材料的二体磨料磨损机理。

2·The main wear mode of PPS is changed from adhesive wear into abrasion wear with the addition of PTFE and kaolin nanoparticles.

PTFE和纳米高岭土的加入使PPS的主要磨损方式由粘着磨损转变为磨粒磨损。

3·Wear resistance—The chip-tool and chip-work interfaces are exposed to such severe conditions that adhesive and abrasion wear is very common.

耐磨性—切屑-刀具与切屑-工件的接触界面处于如此严酷的状态，粘附和磨损是很普遍的。

4·The abrasiOn wear of ore-accumulation drive-over hopper is an important factor restricting increasement of equipment operation rate and production capacity.

通过式漏斗的磨损是制约选矿厂设备作业率及生产能力提高的重要因素。

5·The two body abrasion wear characteristic of Mn copper nickel alloy matrix cast tungsten carbide composite has been studied using high chromium cast iron as a reference material.

以高铬铸铁为参考材料 ，研究了真空熔铸法制备的锰白铜基铸造碳化钨复合材料的二体磨料磨损特性。

6·Aimed at the abrasion of pins, some experiments were carried out and the abrasion course was analyzed, the abrasion course of pins is the breaking-in, the abrasion wear and adhesive abrasion.

通过大量试验，分析了装载机销轴磨损的历程，表明销轴的磨损历程主要分为磨合阶段、磨粒磨损阶段和粘结磨损阶段。

7·For those who wear contacts which are too tight, the risks include swelling of the cornea, redness or corneal abrasion.

如果佩戴过紧的隐形眼镜，那么可能会导致使用者角膜肿胀、眼部泛红或是角膜损伤。

8·Dry eyes, foreign body injuries, and prolonged contact lens wear are all commonly associated circumstances for the development of a corneal abrasion.

干眼症、异物损伤、以及长时间佩戴隐形眼镜均是导致角膜擦伤发生的常见相关情况。

9·The pure gum rubber sleeve of the Type A Valve offers excellent abrasion resistance, and since the Type A uses only air pressure to operate, there are no moving parts to break or wear out.

型夹管阀采用的纯树脂橡胶具有优异的抗磨损能力，因为A型夹管阀只是采用气压进行操作，因此没有活动部件会断裂或磨损。

10·There are scouring abrasion and impact wear two basic types. The microstructure of two kinds of metal loss in process of wear and tear is not exactly the same.

有冲刷磨损和撞击磨损两种基本类型。两种磨损的金属流失过程的微观形态是不完全相同的。

磨损

1·Wear resistance—The chip-tool and chip-work interfaces are exposed to such severe conditions that adhesive and abrasion wear is very common.

耐磨性—切屑-刀具与切屑-工件的接触界面处于如此严酷的状态，粘附和磨损是很普遍的。

2·The abrasion wear mechanism of Mn copper-nickel alloy matrix-cast chromium carbide composite was studied.

研究了真空熔铸法制备的锰白铜基铸造碳化铬复合材料的二体磨料磨损机理。

3·The two body abrasion wear characteristic of Mn copper nickel alloy matrix cast tungsten carbide composite has been studied using high chromium cast iron as a reference material.

以高铬铸铁为参考材料 ，研究了真空熔铸法制备的锰白铜基铸造碳化钨复合材料的二体磨料磨损特性。