全部

1·The paper is dedicated to study the low-cycle fatigue behavior of a certain semi-rigid connection: the top- and -seat angle.

本文尝试研究一种半刚性连接-顶底角钢连接的低周疲劳性能。

2·Therefore , the paper is dedicated to study a new type joint-top and seat angle with double web angles semi-rigid connection.

为此，本文在参照国内外大量文献资料的基础上，致力于研究一种具有优良抗震性能的新型节点一双腹板、顶底角钢半刚性连接节点。

3·The rigid connection between steel girders and reinforced concrete piers is one type of the important applications of composite construction.

钢梁与钢筋混凝土桥墩刚节点结合，是组合结构桥梁重要的结构形式之一。

4·Therefore, the influences of semi-rigid connection on steel frame structure are fully taken into account in the analysis and design of steel frame.

因此，在钢框架的分析和设计时应充分考虑半刚性节点连接的影响。

5·The rigid connection is installed at the top of the reinforced concrete pier, instead of the intersection part of steel girder and reinforced concrete pier.

将刚节点部设置在钢筋混凝土桥墩的顶部，而非目前常用的将其设置在钢梁与钢筋混凝土桥墩交叉部的结构形式。

6·The upper end of the side arches (5) has the rigid connection with the side span girders and the lower end has the rigid connection with the main piers (9).

所述边拱(5)上端与边跨主梁刚性连接，下端与主桥墩(9)刚性连接。

7·The results of analysis indicate that the flange weakening type rigid connection has bigger connection rigid and better behavior of absorbing earthquake energy.

分析结果表明：翼缘削弱型刚性连接具有较大的连接刚度和理想的耗能性能；

8·In comparison with the condition of rigid connection, the influence of semi-rigid connection to effective length factor of columns has been analyzed quantitatively.

通过与刚性连接情况的比较，定量的分析了半刚性连接对框架柱计算长度的影响。

9·It is shown that economical designs may be realized with semi-rigid connections by a variation of connection stiffness that balances the span and end moments in a beam.

连接的柔性对无支撑框架的侧移有很大的影响，设计时通过变化连接的刚度以平衡梁的跨中和端弯矩。

10·Introduce the composition, the hardware and software for two AC servo motors which drive loads simultaneously under rigid connection. Also Present the experimental results.

介绍在刚性连接方式下，用两台交流伺服电机同时驱动同一负载方案的组成、硬件和软件，给出了该系统的实验结果。