全部

1·So, although you can change the media speed and duplex on the physical interface, you set up the IP address and subnet on the logical interface.

因此，尽管可以在物理接口上修改介质速度和双工模式，但是要在逻辑接口上设置IP地址和子网。

2·If you want to add another IP address from the same subnet to an interface, it's simple and can be done with IP aliasing.

如果希望给接口添加同一子网中的另一个IP地址，可以用ip别名轻松地实现。

3·When remote servers reside on the same subnet, the router address is the same as the server address.

当远程服务器位于同一子网时，路由地址与服务器地址相同。

4·Network design including IP address ranges, subnet configuration, computer naming conventions, and so on.

网络设计包括：IP地址范围、子网配置、计算机命名规范等等。

5·IP-based location awareness USES the user's network information, including subnet, net mask, and the Mac address of the router.

基于IP的位置识别利用了用户的网络信息，包括子网、网络掩码和路由器的mac地址。

6·If the route table lookup shows that the packet is destined for a non-local subnet, the router forwards the packet to the next-hop router using the next-hop router's MAC address.

如果查找路由表显示包的目的地不在本地子网，路由器就利用下一跳路由器的MAC地址把包转发给下一跳路由器。

7·Each instance of netserver listened on a dedicated port and IP address; each Ethernet adapter's IP address was on a separate subnet to ensure dedicated traffic.

每个netserver实例监听一个专用端口和IP地址；每个以太网适配器的IP地址属于单独的子网以确保专用的通信流。

8·For this example, set the IP address to 192.168.128.1 and the subnet mask to 255.255.255.0.

对于本例来说，可以将IP地址设置为192.168.128.1，将子网掩码设置为255.255.255.0。

9·You can group the NAS by IP subnet (Listing 3) or you can list the NAS by hostname or IP address (Listing 4).

您可以按IP subnet将NAS分组(清单3)，或者可以按主机名或IP地址列出NAS(清单4)。

10·The subnet mask is an octet that USES the number 255 to represent the network address portion of the IP address and a zero to identify the host portion of the address.

子网掩码由四个字节组成，它的值为255时表示IP地址中网络地址的部分，值为0时则识别IP地址中表示主机号的部分。