全部

1·This swarf is no longer of any use for making aircraft.

这些金属切屑对于飞机制造毫无用处。

2·The method for quantitatively describing carrying and classification of swarf is presented.

给出了对铣屑进行定量描述和分类的可行方法。

3·For swarf cutting, the user selects the top and bottom curves to machine, and a check (or limit) surface.

对于SWARF加工而言，使用者需要选择加工部位的顶部和底部曲线，并选择一个检查面。

4·The metal swarf is stripped from the drum by adjustable scrapers and forced off the end of a discharge chute.

通过可调刮削器将金属切屑剥离，并关闭排放槽。

5·The theory of hydraulic vibratory cutting was applied to cut swarf into shorter ones in machine cutting automation line.

针对机床切削加工自动线中，如何将切屑折断成一段段较短的断屑的问题，采用了液压振动断屑装置。

6·The linear guide ways have no contact with grinding swarf which drops to the bottom of the machine for transfer to the sump.

研磨屑会掉落到机械的底部，然后转移到污水坑，因此与线性滑轨没有任何接触。

7·About one third of the consumed energy was due to the interaction of the swarf with the applied fluid and bond matrix, while the remaining energy was attributed to ductile plowing.

大约三分之一的能量消耗于岩屑流体与结合剂之间的作用，其余能量消耗于塑性耕犁。

8·Ultrasonic cleaning is a good fit for a wide range of applications, from removing swarf and grinding and polishing residue to treating parts covered in oil, grease, or layers of paint.

超声（波）清洗是工业领域一种广泛应用的新方法，可以去除工件表面的磨削，研磨，抛光后表面残留的碎屑，去除工件表面残留的油污，甚至可以去除油漆层。

9·The fourth seat Thomas Berdych of the Czech Republic swarf Germany's Nicholas Kiefer in straight set, and there were also straight forward wins for Micheal Youzhny and Marcos Baghdatis.

来自捷克的排名第四的托马斯·伯蒂奇直落盘数击败了德国选手尼古拉斯·基弗。另外俄国选手尤兹尼和塞浦路斯选手巴格达蒂斯也分别以直落获胜。

切屑

1·This swarf is no longer of any use for making aircraft.

这些金属切屑对于飞机制造毫无用处。