全部

1·It depends on the elastic foundation of the matrix and the flexural stiffness of fibers.

这种分析还依赖于基体的弹性以及纤维在基体中的弯曲刚度。

2·Based on the tested results, the formulae for calculating flexural bearing capacity and flexural stiffness of LACFST are suggested.

基于试验结果，建议了计算钢管轻集料混凝土抗弯承载力与与抗弯刚度的规范公式。

3·This study investigates the short-term flexural stiffness and the cracking property in a new emerging cold-formed thin-wall steel reinforced concrete slab.

本文主要对一种新型楼板-钢网构架混凝土复合楼板的短期抗弯刚度和裂缝问题进行了研究和分析。

4·The rational determination of the flexural stiffness and the shearing stiffness of concrete filled steel tube is very important in the deformation calculations.

合理地确定钢管混凝土的抗弯刚度和剪切刚度是进行其变形计算的重要前提，目前国内外很少有系坑的研究和报道。

5·The flexural bearing capacity and flexural stiffness of LACFST are calculated using the formula of existing criterions, which are compared with the tested values.

采用已有的钢管混凝土规范公式对钢管轻集料混凝土的抗弯承载力和抗弯刚度分别进行计算，计算结果与试验值进行分析比较。

6·Fabric Stiffness Tester. To determine the bending height, flexural rigidity and bending modulus of fabric by simple procedures and calculation.

织物硬挺度测试仪，可通过简单操作及计算测出织物的弯曲高度、弯曲刚度、弯曲模量。

7·In our national Design Code of Reinforced Concrete Structures, the stiffness formulas of Reinforced Concrete Flexural members were based on half theoretical analysis and half test result.

我国钢筋混凝土结构设计规范中，钢筋混凝土受弯构件的刚度公式是在半理论半实验的基础上建立起来的。

8·The parameters reflecting normal stiffness have more obvious effects on extensional vibration mode than those on flexural mode and torsion mode.

结合面法向刚度大小的参数对纵向振动模态的影响比对弯曲、扭振模态的影响显著；

9·Based on the experiments of the 12 SRC flexural members, the stiffness, crack width and ultimate bending strength of the SRC beams are analysed.

本文以12个型钢钢筋混凝土(以下简称SRC)梁受弯试验为基础，对SRC梁的刚度、裂缝宽度和受弯承载力进行试验研究和理论分析。

10·The experiments show that PCSPs have excellent flexural behavior, stiffness and flexural capacity, which satisfy the requirements of codes.

试验研究表明，预应力混凝土夹芯板具有很好的抗弯性能，刚度和承载力均能满足规范要求。