全部

1·An impact load is a rapidly applied load (an energy load).

在冲击载荷是一个迅速应用于负荷(能源负荷)。

2·A static load is a gradually applied load for which equilibrium is reached in a relatively short time.

静态负荷是一个逐步应用负载平衡而达到在相对短的时间。

3·This formula gives a theoretical basis for the calculation of applied load in bar stress severing method.

该公式为应力断料时的预荷力计算提供了理论依据。

4·When the applied load exceeds the limit strength of the material as a result of parts breaking overload fracture.

当外加载荷超过材料强度极限而造成零件断裂称为过载断裂。

5·In terms of geometry, the defining parameters are the body width, hole diameter and the location of the applied load.

在条款几何，确定参数是身体的宽度项，孔直径和地点应用负载性。

6·It is analysed that applied load capacity of reinforced concrete for freezing and thawing cycle under ocean environment.

分析了海洋环境下的钢筋混凝土在冻融破坏下的承载力。

7·The coating layer hardness depends not only on the coating material, but also on the applied load and coating layer thickness.

涂层硬度不仅取决于涂层材料本身，同时还与试验负荷和膜层的厚度密切相关。

8·Elastic deformation is that part of the deformed material which when the applied load is removed would spring back to its normal shape.

弹性变形是材料变形部分在去除载荷后可以恢复到原来的形状。

9·The applied load, shape of the indenter and properties of substrate that have influences on microhardness test result have been studied.

研究了施加载荷、压头形状、基板性质等因素对涂层显微硬度测试结果的影响，得出了为准确确定涂层硬度指标所适合的试验条件。

10·Because the mechanical systems work in the long time, affected by the environment and applied load, occurrence of failure is unavoidable.

由于机械系统在长时间的工作过程中，受到环境和载荷的影响，避免不了发生失效。