全部

1·Their location conditions to design and manufacture of wire rod type products.

自己的工位状况自行设计和制造线棒式产品。

2·Some suggestions to raise quality of high carbon steel wire rod are put forward.

为提高国内高碳线材质量提出一些建议。

3·To analyze the factors affecting drawing property of wire rod for hose steel wire.

分析影响胶管钢丝用线材拉拔性能的因素。

4·The formed split end and tail cracking of wire rod during rolling are a common sight.

线材轧制过程中轧件出现劈头与尾裂是常见现象。

5·Key measures to decrease inclusion are put forward as producing high carbon wire rod.

提出生产高碳钢线材过程中减少夹杂物的关键措施。

6·A new non-contact method for dynamic measuring the diameter of wire rod is presented.

提出一种新的非接触式动态测量金属线材直径方法。

7·The fracture during ER70S-6 wire rod drawing of gas shield welding wire steel is analysed.

对ER70S - 6气保焊丝钢在拉拔过程中的断裂问题进行分析。

8·Good and poor quality of cooling water have influence on wire rod, especially on surface quality.

冷却水质的优劣对高线盘条的质量有一定的影响，尤其是对表面质量影响较大。

9·Flying shear is used to cut head and end and design length as well as accident on wire rod producing.

线材生产中的飞剪机是用来切头、切尾、以及当出现事故时切取定尺的。

10·The causes affecting mechanical property of alloyed welding wire rod have been analyzed in this paper.

本文对影响合金焊盘条性能的原因进行了分析。

线材

1·The method and example of pass optimization design of high speed wire rod finishing mill by dynamic programming with minimum total tension coefficient are described.

阐述了以动态规划法按最小总张力系数对高速线材轧机精轧机组孔型进行优化设计的方法与实例。

2·At present, wire rod, rebar and hot varieties are three volumes of electronic trading in Shanghai varieties.

目前，线材，螺纹钢和热品种在上海的三个品种的电子交易量。

3·The principle of minimum tension control in high - speed wire rod rolling mill and the concerned calculation are introduced in this paper.

文章主要介绍了高速线材轧机的微张力控制原理，并对算法实现进行了详细描述。

4·Flying shear is used to cut head and end and design length as well as accident on wire rod producing.

线材生产中的飞剪机是用来切头、切尾、以及当出现事故时切取定尺的。

5·To introduce the situation of possible occurrence of deformation martensite in the course of application of wire rod products.

介绍线材制品在使用过程中可能出现形变马氏体的情况。

盘条

1·Chromium - vanadium steel wire rod, wire and springs - high duty ground wire - hardened and tempered - specification.

铬钒钢盘条金属丝和弹簧。高负荷地线。淬火和回火。规范。

2·The influence of steel wire mechanics performance nonuniformity mainly has three factors: wire rod quality uniformity, wire drawing technology and dies, heat treatment processing.

影响钢丝力学性能的不均匀性主要有三个方面的因素：盘条质量的均匀性、拉丝工艺及模具、热处理工艺。

3·To introduce the concrete measures for environment protection alteration of wire rod pickling and phosphating line.

介绍盘条酸洗磷化生产线进行环保改造的具体措施。

4·The researching results make known, to obtain the thin and dense oxide in the production process is effective way to enhance anti-corrosion properties of hot-rolled wire rod.

研究结果表明，生产过程中获得较薄且致密的氧化皮是提高热轧盘条防锈蚀性的有效途径。

5·There is brittle fracture frequently during drawing the high carbon wire rod 82b, which is used for pre-stressed strand.

预应力钢绞线用优质高碳盘条82b在拉拔过程中常出现脆断现象。