全部

1·Reaming is one of the finish machining methods of hole.

铰孔是孔的精加工手法之一。

2·Many parts of machine product all involve finish machining of holes.

对机械产品的多种零件均涉及孔的精加工。

3·The principle of pulse electrochemical finish machining (PECFM) is discussed.

阐述了脉冲电化学光整加工原理。

4·The adjustment, clamping and machining method in finish machining are summarized.

总结了精加工时的调整、装夹和加工方法。

5·The finish machining can be completed in one machine tool by milling and rolling.

通过铣削和滚压，在一台机床上完成球面精加工。

6·In this process, there are much rough machining but less deep and finish machining.

在制作上粗加工多，深加工、精加工少。

7·These methods have been used in finish machining during assembling components of aircraft.

这些方法已在飞机部件装配精加工中获得应用。

8·Based on analyzing the mechanism of pulse electrochemical finish machining, a practical experiment is designed.

在分析研究脉冲电化学光整加工原理的基础之上，结合实际进行了实验设计。

9·The goal of finish machining is achieved and surface roughness is reduced 3 ~ 5 grades based on experimental data.

根据实验得到的优选数据进行加工，有效地降低了表面粗糙度3 ~ 5级，达到了光整加工目的。

10·The volt ampere properties of electrolyte in pulse electrochemical finish machining (PEFM) are investigated in this paper.

对脉冲电化学光整加工（P EFM ）中所采用的一种电解液的伏安特性进行了实验研究。

精加工

1·These methods have been used in finish machining during assembling components of aircraft.

这些方法已在飞机部件装配精加工中获得应用。

2·Grinding gear with the toroidal involute interior thread worm grind wheel is a new kind of process in hard surface gear finish machining.

渐开面包络环面内螺纹蜗杆砂轮磨齿，是一种硬齿面齿轮精加工的新型工艺。

3·Reaming is one of the finish machining methods of hole.

铰孔是孔的精加工手法之一。

4·There is an obvious disparity between our nation and other developed nations in the field of hard surface finish machining of the spiral bevel gear.

在螺旋锥齿轮硬齿面精加工这一环节上，我国与发达国家的差距尤为明显。

5·Respectively use the original NC code and the compensated NC code in the blade surface finish machining, then collect the points data of the blade surface with a coordinate measuring machine.

分别用原nc代码及补偿后的NC代码进行叶片型面的精加工，接着用三坐标测量机进行加工表面点数据的采集。