全部

1·Take the average temperature in the curing time as curing temperature.

养护温度取各湿喷桩养护期的平均气温。

2·Particularly suited where low curing temperature is required for heat sensitive components.

特别适用于需要低温固化的热敏感元件。

3·Under the curing temperature, it can release activing sulfur, effective sulfur content is about 27%.

在硫化温度下能释放活性硫， 有效硫含量为27%。

4·The curing temperature of the liquid phenolic resin was slightly lower than that of powder phenolic resin.

液体酚醛树脂的固化温度稍低于粉状酚醛树脂。

5·Meanwhile, as the curing temperature increases, the tensile modulus of composites improves in some degree.

然而复合材料的拉伸模量随着成型温度的升高有一定幅度的提升。

6·These crosslinkers are stable in water at normal bath temperature but become reactive at curing temperatures.

这些交联剂于正常槽液温度下在水中很稳定，但在固化温度下就变得活泼起来。

7·This may be done in a reciprocating screw machine where one charge at a time is brought to curing temperature.

这可能是在做往复螺杆机，其中一名主管在一个时间是带来的固化温度。

8·The influences of curing temperature and alkali contents of cement on expansion of mortar bars are investigated.

研究了养护温度和水泥碱含量（质量分数，下同）与硅质集料砂浆试样膨胀的关系。

9·The influence of curing reaction heat on curing temperature field of cubic rubber block and tire was investigated.

探讨长方体胶块和轮胎硫化反应热对硫化温度场的影响。

10·As for curing process, the influence of dosage of curing agent and curing temperature on gel time was investigated.

在固化工艺方面，研究了固化剂含量和固化温度对于凝胶时间的影响。