全部

1·Table 3.9. Characteristic temperatures determined from the bending modulus curves.

表3.9从弯曲模量曲线测定的特征温度。

2·The tensile strength, bending strength, impact strength, tensile modulus of elasticity and bending modulus of elasticity were determined.

测试了塑木板材的拉伸强度、弯曲强度、冲击强度、拉伸弹性模量、弯曲弹性模量等力学性能；

3·Fabric Stiffness Tester. To determine the bending height, flexural rigidity and bending modulus of fabric by simple procedures and calculation.

织物硬挺度测试仪，可通过简单操作及计算测出织物的弯曲高度、弯曲刚度、弯曲模量。

4·Fabric by tester dull color. gives degrees operation and simple calculation out the fabric of bending height, bending rigidity, bending modulus. Standard: ERT 50-2 ASTM D1388 bs3356.

织物硬挺度测试仪，可通过简单操作及计算求出织物的弯曲高度、弯曲刚度、弯曲模量。标准：ERT 50 - 2 ASTM D1388 BS 3356。

5·The tensile strength and the bending modulus of RHDPE/EVA/MWRP blend increased by 35% and 25% respectively when the waste rubber powder was modified by self-made surface modifier ACDI.

废胶粉经自制表面改性剂ACDI预处理后，其相应的RHDPE/EVA/MWRP体系的拉伸强度和弯曲模量分别增加35%和25%，而对共混物的其它性能影响不大。

6·Bending Strength and Weibull modulus of eight kinds of ceramics samples were studied.

研究了八种不同陶瓷试样的抗弯强度和韦布尔模数。

7·Results show that the shape and relative thickness of section, section modulus in bending are the main factors that determine the bending properties of the profiles.

结果表明，型材的截面形状、相对厚度及抗弯截面系数等是决定弯曲性能的主要因素。

8·The theory and method of bending test on nanobeam for the measurement of Young's modulus based on atomic force microscope (AFM) are introduced.

阐述了基于原子力显微镜(afm)的弯曲测试测量纳米梁杨氏模量的理论和方法。

9·Airport cement concrete pavement structural parameters include slab thickness, concrete bending strength elastic modulus and foundation reaction module.

机场水泥混凝土道面结构参数包括板厚、混凝土弯拉强度和弯拉弹性模量、地基反应模量。

10·There was little change in the bending strength, Young's modulus and dynamic ductility of the test wood treated by microwave irradiation and steaming appropriately.

适当的微波处理和汽蒸处理使试材的抗弯强度、抗弯弹性模量和冲击韧性并不明显降低。