全部

1·Finally, the mixed control is discussed and the corresponding mould plate is proposed.

最后还讨论了混合控制方式，并提出了相应的模板。

2·The mould plate and ejector grid system is shown in chain-dotted lines in the cross-sectional view.

模板和顶料格架系统在剖面图上以点划线表示。

3·This artical presents the productive technology and formulae of urea-formaldehyde resin used in bamboo mould plate.

本文对竹胶板模板用脲醛树脂胶的生产工艺和配方试验研究做了介绍。

4·Function: The suction machinewill pile the shaped blank and mould plate one by one and put theminto procuring process.

功能：吸板机作用把成型板坯经过三工位动作一模一板垒起来，进入予养。

5·The paper introduces the laser cut mould plate, the characteristics of tin solder and some problems which should be paid attention to in screen printing.

重点介绍了激光切割成型的模版、锡焊膏的特点及丝网印刷中应注意的问题。

6·Automation production was achieved by applying ball bearing, tapered wedge and slide block mechanism to pull off the fixed mould plate and gating plate, and control the pull of...

利用滚珠、斜楔、滑块机构拉开定模板和浇口板并控制其拉开距离，从而达到自动生产目的。

7·Automation production was achieved by applying ball bearing, tapered wedge and slide block mechanism to pull off the fixed mould plate and gating plate, and control the pull off distance.

利用滚珠、斜楔、滑块机构拉开定模板和浇口板并控制其拉开距离，从而达到自动生产目的。

8·Mould adjustment system is drive by hydraulic controlled gear transmission, which is easy for operation and can keep parallelity between head plate and middle platen.

液压控制齿轮调模装置，操作简单，稳定保持头板及中板之平行度；

9·It is ideal for sealing all the random gaps between dummy bar head and mould copper plate, to prevent the hot metal infiltration and break out while casting.

非常适合于引锭头与结晶器铜板之间无规则缝隙的密封，防止开浇时渗、漏钢的现象的出现。

10·He transferred the mould to a clean plate and let it grow for two weeks.

于是他很快把霉菌移到了一只洁净的盘子里，让它生长了两个星期。

模板

1·Automation production was achieved by applying ball bearing, tapered wedge and slide block mechanism to pull off the fixed mould plate and gating plate, and control the pull off distance.

利用滚珠、斜楔、滑块机构拉开定模板和浇口板并控制其拉开距离，从而达到自动生产目的。

2·The mould plate and ejector grid system is shown in chain-dotted lines in the cross-sectional view.

模板和顶料格架系统在剖面图上以点划线表示。

3·Finally, the mixed control is discussed and the corresponding mould plate is proposed.

最后还讨论了混合控制方式，并提出了相应的模板。

4·Automation production was achieved by applying ball bearing, tapered wedge and slide block mechanism to pull off the fixed mould plate and gating plate, and control the pull of...

利用滚珠、斜楔、滑块机构拉开定模板和浇口板并控制其拉开距离，从而达到自动生产目的。